[Comm] Скорость по USB

[Oleg Sukhanov]

Имеем в наличии: FlexDrive, контроллер USB2, диск в драйве виден, 
монтируется. Но подключается по протоколу USB1, скорость 
соответственно аховая. Как бы заставить систему подключаться по USB2?

T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 4
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.04
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=256ms
T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=05ab ProdID=0060 Rev=11.10
S:  Manufacturer=In-System Design
S:  Product=USB Storage Adapter
S:  SerialNumber=2B010106039449A3
C:* #Ifs= 1 Cfg#= 2 Atr=c0 MxPwr= 98mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 
Driver=usb-storage
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   2 Ivl=32ms
T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=05ab ProdID=0060 Rev=11.10
S:  Manufacturer=In-System Design
S:  Product=USB Storage Adapter
S:  SerialNumber=2B010106039449A3
C:* #Ifs= 1 Cfg#= 2 Atr=c0 MxPwr= 98mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 
Driver=usb-storage
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   2 Ivl=32ms

Module                  Size  Used by    Not tainted
ehci-hcd               15528   0  (unused)
usb-uhci               21612   0  (unused)
vfat                    9708   0  (autoclean)
fat                    29976   0  (autoclean) [vfat]
xfs                   492132   0  (autoclean)
via686a                 8128   0  (unused)
i2c-proc                6448   0  [via686a]
i2c-isa                 1128   0  (unused)
i2c-viapro              3952   0  (unused)
i2c-core               15144   0  [via686a i2c-proc i2c-isa 
i2c-viapro]
ide-cd                 27300   0  (autoclean)
cdrom                  27644   0  (autoclean) [ide-cd]
apm                     9504   1
floppy                 46684   0  (autoclean)
3c59x                  25680   1  (autoclean)
ipx                    16036   1  (autoclean)
usb-storage            63468   0
usbcore                57844   1  [ehci-hcd usb-uhci usb-storage]
ext2                   32960   2  (autoclean)
agpgart                31848   0  (unused)
rtc                     6044   0  (autoclean)
reiserfs              165440   3
aic7xxx               118232   0  (unused)
sd_mod                 10940   0
scsi_mod               91620   4  [usb-storage aic7xxx sd_mod]