[Comm] Scaner Acer640BT(USB)-Rezultat experimentov.
Дмитрий
=?iso-8859-1?q?cornerman_=CE=C1_narod=2Eru?=
Пт Мар 28 01:24:18 MSK 2003
Доброе время суток!
OS ALT Linux Master 2.2
Результаты подключения сканера Acer 640BT(USB):
_>> В файле 'dll.conf' оставил запись - snapscan и все. Отредактировал
>> файл "snapscan.conf" до вида:
>> /etc/sane.d/acerfirm /etc/sane.d/U64V119.BIN # здесь просто загрузка,
>> которую можно запустить
>>
>> #вручную для проверки работоспособности
>> /dev/usb/scanner0
>> usb 0x4a5 0x2040
В данном случае будет следующее:
/etc/sane.d/acerfirm /etc/sane.d/U64V119.BIN
/dev/usb/scanner0
usb 0x4a5 0x20be
Далее можно попробовать выполнить:
export SANE_DEBUG_SNAPSCAN=2
scanimage -L_
Далее приводятся файлы, которые переделывались(вместо U64V119.BIN был
U64V120.BIN).
dll.conf
# enable the next line if you want to allow access through the network:
net
abaton
agfafocus
apple
avision
artec
as6e
bh
canon
canon630u
#canon_pp
coolscan
coolscan2
#dc25
#dc210
#dc240
dmc
epson
fujitsu
hp
hpsj5s
leo
matsushita
microtek
microtek2
mustek
#mustek_pp
mustek_usb
nec
pie
pint
plustek
#pnm
qcam
ricoh
s9036
sceptre
sharp
sm3600
snapscan
sp15c
#st400
tamarack
teco1
teco2
teco3
#test
umax
#umax_pp
umax1220u
v4l
#
# The following backends are not included in the sane-backends distribution
# If you want to use them, download them from their webpages and read their
# documentation
#
# HP OfficeJet backend homepage: http://hpoj.sf.net/
# Uncomment the following line if hpoj is installed:
#hpoj
#
# gt68xx backend homepage: http://www.meier-geinitz.de/sane/gt68xx-backend/
# Uncomment the following line if gt68xx is installed:
#gt68xx
# enable the next line if you want to allow access through the network:
net
abaton
agfafocus
apple
avision
artec
as6e
bh
canon
canon630u
#canon_pp
coolscan
coolscan2
#dc25
#dc210
#dc240
dmc
epson
fujitsu
hp
hpsj5s
leo
matsushita
microtek
microtek2
mustek
#mustek_pp
mustek_usb
nec
pie
pint
plustek
#pnm
qcam
ricoh
s9036
sceptre
sharp
sm3600
snapscan
sp15c
#st400
tamarack
teco1
teco2
teco3
#test
umax
#umax_pp
umax1220u
v4l
_ snapscan_
#
# The following backends are not included in the sane-backends distribution
# If you want to use them, download them from their webpages and read their
# documentation
#
# HP OfficeJet backend homepage: http://hpoj.sf.net/
# Uncomment the following line if hpoj is installed:
#hpoj
#
# gt68xx backend homepage: http://www.meier-geinitz.de/sane/gt68xx-backend/
# Uncomment the following line if gt68xx is installed:
#gt68xx
snapscan.conf
#------------------------------ General -----------------------------------
# Change to the fully qualified filename of your firmware file, if
# firmware upload is needed by the scanner
firmware /path/to/your/firmware/file.bin
# If not automatically found you may manually specify a device name.
# For USB scanners also specify bus=usb, e.g.
# /dev/usb/scanner0 bus=usb
# For SCSI scanners specify the generic device, e.g. /dev/sg0 on Linux.
# /dev/sg0
#---------------------------------------------------------------------------
# No changes should be necessary below this line
#---------------------------------------------------------------------------
#-------------------------- SCSI scanners ----------------------------------
# These SCSI devices will be probed automatically
scsi AGFA * Scanner
scsi COLOR * Scanner
scsi Color * Scanner
scsi ACERPERI * Scanner
#--------------------------- USB scanners
-----------------------------------
# These USB devices will be probed automatically
# (This will currently work only on Linux)
# Benq/Acer/Vuego 320U
usb 0x04a5 0x2022
# Benq/Acer/Vuego 620U / 620UT
usb 0x04a5 0x1a2a
usb 0x04a5 0x2040
# Benq/Acer/Vuego 640U
usb 0x04a5 0x2060
# Benq/Acer/Vuego 640BU
usb 0x04a5 0x207e
# Benq/Acer/Vuego 1240U
usb 0x04a5 0x20c0
# Benq/Acer/Vuego 3300 / 4300
usb 0x04a5 0x20b0
# Benq/Acer/Vuego 4300
usb 0x04a5 0x20de
# Benq/Acer/Vuego 5000
usb 0x04a5 0x20fc
# Benq/Acer/Vuego 5300
usb 0x04a5 0x20fe
# Agfa 1236U
usb 0x06bd 0x0002
# Agfa 1212U
usb 0x06bd 0x0001
usb 0x06bd 0x2061
# Agfa Snapscan e10
usb 0x06bd 0x2093
# Agfa Snapscan e20
usb 0x06bd 0x2091
# Agfa Snapscan e25
usb 0x06bd 0x2095
# Agfa Snapscan e26
usb 0x06bd 0x2097
# Agfa Snapscan e40
usb 0x06bd 0x208d
# Agfa Snapscan e42
usb 0x06bd 0x20ff
# Agfa Snapscan e50
usb 0x06bd 0x208f
# Agfa Snapscan e52
usb 0x06bd 0x20fd
#------------------------------ General -----------------------------------
# Change to the fully qualified filename of your firmware file, if
# firmware upload is needed by the scanner
firmware /path/to/your/firmware/file.bin
# If not automatically found you may manually specify a device name.
# For USB scanners also specify bus=usb, e.g.
# /dev/usb/scanner0 bus=usb
# For SCSI scanners specify the generic device, e.g. /dev/sg0 on Linux.
# /dev/sg0
#---------------------------------------------------------------------------
# No changes should be necessary below this line
#---------------------------------------------------------------------------
#-------------------------- SCSI scanners ----------------------------------
# These SCSI devices will be probed automatically
scsi AGFA * Scanner
scsi COLOR * Scanner
scsi Color * Scanner
scsi ACERPERI * Scanner
#--------------------------- USB scanners
-----------------------------------
# These USB devices will be probed automatically
# (This will currently work only on Linux)
# Benq/Acer/Vuego 320U
usb 0x04a5 0x2022
# Benq/Acer/Vuego 620U / 620UT
usb 0x04a5 0x1a2a
usb 0x04a5 0x2040
# Benq/Acer/Vuego 640U
usb 0x04a5 0x2060
# Benq/Acer/Vuego 640BU
usb 0x04a5 0x207e
# Benq/Acer/Vuego 1240U
usb 0x04a5 0x20c0
# Benq/Acer/Vuego 3300 / 4300
usb 0x04a5 0x20b0
# Benq/Acer/Vuego 4300
usb 0x04a5 0x20de
# Benq/Acer/Vuego 5000
usb 0x04a5 0x20fc
# Benq/Acer/Vuego 5300
usb 0x04a5 0x20fe
# Agfa 1236U
usb 0x06bd 0x0002
# Agfa 1212U
usb 0x06bd 0x0001
usb 0x06bd 0x2061
# Agfa Snapscan e10
usb 0x06bd 0x2093
# Agfa Snapscan e20
usb 0x06bd 0x2091
# Agfa Snapscan e25
usb 0x06bd 0x2095
# Agfa Snapscan e26
usb 0x06bd 0x2097
# Agfa Snapscan e40
usb 0x06bd 0x208d
# Agfa Snapscan e42
usb 0x06bd 0x20ff
# Agfa Snapscan e50
usb 0x06bd 0x208f
# Agfa Snapscan e52
usb 0x06bd 0x20fd
_ /etc/sane.d/acerfirm /etc/sane.d/U64V120.BIN
/dev/usb/scanner0
usb 0x4a5 0x20be_
Результаты комманд:
_export SANE_DEBUG_SNAPSCAN=2
scanimage -L
_[root на localhost root]# export SANE_DEBUG_SNAPSCAN=2
[root на localhost root]# scanimage -L
[sanei_debug] Setting debug level of snapscan to 2.
[snapscan] add_scsi_device: error opening device /etc/sane.d/acerfirm:
Invalid argument
[snapscan] add_usb_device: error opening device libusb:001:002: Device busy
Что не так сделано?
Заранее благодарен за подробные ответы.
Подробная информация о списке рассылки community