[Comm] nForce2

Dennis Fedotov =?iso-8859-1?q?lt_=CE=C1_server=2Eby?=
Ср Мар 26 12:36:29 MSK 2003


3 Март 2003 13:35, Вы написали:
> Здравствуйте, community.
>
> Кто-нить в курсе, как у Мастера2.0 с поддержкой чипсета nForce2?
> Можно ли Мастер установить на мамку с ним? Поддерживается ли звук?
> Мать - Epox Ep-8RDA.
Вчера смогли установить М2.0 именно на эту плату, процессор Атлон 2100+, 
памяти 512 Мб, видео что-то nVidia 4 Ti впрочем все в аттаче вывод команды 
dmesg. Вроде бы как эта плата самая быстрая за эту цену (~100$). Мастер стал 
на ура из коробки и без всякого шаманства, про звук не было 
времени\возможности проверить. :-)

-- 
Rgrds,
Dennis Fedotov
----------- следующая часть -----------
Linux version 2.4.18-alt6master-up (goldhead на mash.office.altlinux.ru) (gcc version 2.96 20000731 (ALT Linux, build 2.96-ipl15mdk)) #1 Tue Apr 16 14:50:56 MSD 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Found and enabled local APIC!
Building zonelist for node : 0
Kernel command line: root=/dev/hda6  fbprogress=/dev/tty10  vga=791
Initializing CPU#0
Detected 1737.281 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3460.30 BogoMIPS
Memory: 513196k/524224k available (916k kernel code, 10640k reserved, 268k data, 752k init, 0k highmem)
Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0383fbff c1c3fbff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0383fbff c1c3fbff 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU:             Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon(tm) XP 2100+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch на atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb4f0, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Discovered primary peer bus ff [IRQ]
PCI: Using IRQ router default [10de/01e0] at 00:00.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.5.1 initialized
vesafb: framebuffer at 0xd0000000, mapped to 0xa0800000, size 131072k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:ea00
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
block: 256 slots per queue, batch=64
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PCI_IDE: unknown IDE controller on PCI bus 00 device 48, VID=10de, DID=0065
PCI_IDE: chipset revision 162
PCI_IDE: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: FUJITSU MPG3102AT E, ATA DISK drive
hdc: CR-48XETE, ATAPI CD/DVD-ROM drive
hdd: ASUS CD-S500/A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 20015856 sectors (10248 MB) w/512KiB Cache, CHS=1245/255/63
Partition check:
 hda: hda1 hda2 < hda5 hda6 >
NET4: Frame Diverter 0.46
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: AppleTalk 0.18a for Linux NET4.0
RAMDISK: Compressed image found at block 0
Uncompressing.....done.
Freeing initrd memory: 128k freed
VFS: Mounted root (ext2 filesystem).
reiserfs: checking transaction log (device 03:06) ...
Warning, log replay starting on readonly filesystem
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
change_root: old root has d_count=2
Trying to unmount old root ... okay
Freeing unused kernel memory: 752k freed
Warning: unable to open an initial console.
Executing init=/sbin/init
Real Time Clock Driver v1.10e
Adding Swap: 120452k swap-space (priority -1)
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: MITSUMI   Model: CR-48XETE         Rev: 482R
  Type:   CD-ROM                             ANSI SCSI revision: 02
MSDOS FS: IO charset koi8-r
MSDOS FS: Using codepage 866
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial driver version 5.05c-ml (2001-11-27) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: irq 7 detected
inserting floppy driver for 2.4.18-alt6master-up
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
01:0b.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xc400. Vers LK1.1.16
divert: allocating divert_blk for eth0
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: compatibility mode
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Setting latency timer of device 00:02.0 to 64
usb-ohci.c: USB OHCI at membase 0xa88bf000, IRQ 11
usb-ohci.c: usb-00:02.0, PCI device 10de:0067 (nVidia Corporation)
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Setting latency timer of device 00:02.1 to 64
usb-ohci.c: USB OHCI at membase 0xa88c1000, IRQ 5
usb-ohci.c: usb-00:02.1, PCI device 10de:0067 (nVidia Corporation)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
usb.c: USB disconnect on device 1
usb.c: USB bus 1 deregistered
usb.c: USB disconnect on device 1
usb.c: USB bus 2 deregistered
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub


Подробная информация о списке рассылки community