[Comm] tvtuner Pinnacle PCTV Pro

[Ткаченко Максим]

Ну не работает эта гадость....
 вот что в логи кидает 
Jun 22 11:54:54 localhost modprobe: modprobe: Can't locate module sound-slot-1
Jun 22 11:54:54 localhost modprobe: modprobe: Can't locate module 
sound-service-1-0
Jun 22 11:54:55 localhost consolehelper[1280]: executing 
"/usr/sbin/kv4lsetup": (home --> root --> root)
Jun 22 11:54:56 localhost kernel: Linux video capture interface: v1.00
Jun 22 11:54:56 localhost kernel: i2c-core.o: i2c core module version 2.7.0 
(20021208)
Jun 22 11:54:56 localhost kernel: i2c-algo-bit.o: i2c bit algorithm module 
version 2.7.0 (20021208)
Jun 22 11:54:56 localhost kernel: bttv: driver version 0.7.96 loaded
Jun 22 11:54:56 localhost kernel: bttv: using 4 buffers with 2080k (8320k 
total) for capture
Jun 22 11:54:56 localhost kernel: bttv: Host bridge is VIA Technologies, Inc. 
VT8377 [KT400 AGP] Host Bridge
Jun 22 11:54:56 localhost kernel: bttv: Bt8xx card found (0).
Jun 22 11:54:56 localhost kernel: PCI: Found IRQ 10 for device 00:0c.0
Jun 22 11:54:56 localhost kernel: PCI: Sharing IRQ 10 with 00:0c.1
Jun 22 11:54:56 localhost kernel: PCI: Sharing IRQ 10 with 00:10.2
Jun 22 11:54:56 localhost kernel: PCI: Sharing IRQ 10 with 00:11.5
Jun 22 11:54:56 localhost kernel: bttv0: Bt878 (rev 17) at 00:0c.0, irq: 10, 
latency: 32, mmio: 0xea000000
Jun 22 11:54:56 localhost kernel: bttv0: detected: Pinnacle PCTV [card=39], 
PCI subsystem ID is 11bd:0012
Jun 22 11:54:56 localhost kernel: bttv0: using: BT878(Pinnacle PCTV Studio/Ra) 
[card=39,insmod option]
Jun 22 11:54:56 localhost kernel: i2c-algo-bit.o: Adapter: bt848 #0 scl: 1  
sda: 1 -- testing...
Jun 22 11:54:56 localhost kernel: i2c-algo-bit.o: bt848 #0 passed test.
Jun 22 11:54:56 localhost kernel: bttv0: i2c: checking for MSP34xx @ 0x80... 
found
Jun 22 11:54:56 localhost kernel: bttv0: miro: id=30 tuner=4 radio=matchbox 
stereo=yes
Jun 22 11:54:56 localhost kernel: bttv0: using tuner=4
Jun 22 11:54:56 localhost kernel: bttv0: i2c: checking for MSP34xx @ 0x80... 
found
Jun 22 11:54:56 localhost kernel: msp34xx: init: chip=MSP3410G-B11, has NICAM 
support
Jun 22 11:54:56 localhost kernel: msp3410: daemon started
Jun 22 11:54:56 localhost kernel: bttv0: i2c attach [client=MSP3410G-B11,ok]
Jun 22 11:54:56 localhost kernel: bttv0: i2c: checking for TDA9875 @ 0xb0... 
not found
Jun 22 11:54:56 localhost kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... 
not found
Jun 22 11:54:56 localhost kernel: tvaudio: TV audio decoder + audio/video mux 
driver
Jun 22 11:54:56 localhost kernel: tvaudio: known chips: 
tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 
(PV951)
Jun 22 11:54:57 localhost kernel: tuner: probing bt848 #0 i2c adapter 
[id=0x10005]
Jun 22 11:54:57 localhost kernel: tuner: chip found @ 0xc0
Jun 22 11:54:57 localhost kernel: bttv0: i2c attach [client=Philips 
(SECAM+PAL_BG) (FI1216MF,ok]
Jun 22 11:54:57 localhost kernel: bttv0: registered device video0
Jun 22 11:54:57 localhost kernel: bttv0: registered device vbi0
Jun 22 11:54:57 localhost kernel: bttv0: registered device radio0
Jun 22 11:54:58 localhost kernel: bttv0: PLL: 28636363 => 35468950 ... ok

Ну не понимаю я почему.... В виндах работает.... в документации на ядро тоже 
работает...
установлено 2.4.20.-alt7.

Помогите а, ну очень надо в линуксе чтобы эта карта завелась....
-- 
С уважением