[Comm] ALM 2.2, копирование audio CD -- kernel ide bug?

[Andrei Lomov]

Прошу прошения за длинный постинг,
но тут обнаружилось продолжение истории 


Короче, не только у меня звуковые CD не рипаются под линуксом...

И модель другая, и дистрибутив другой -- симптомы те же...

Чипсет VIA может портить.


================================ 
FORUMS > LINUX ARENA


Thread Title: CD-RW problem with 6VIA85T & Teac-540E

 Created On Saturday 7, June, 2003 10:36 AM 
 

  
 A.
 New Member
 
 Would someone help me. 
 
I upgrade my m/b to 
 
6via85t 
BIOS Ver:1.0 08/13/2002 
08/13/2002-694X-686B-6A6LJX3JC-00 
 
and get a big problem 
with my CD-RW Teac-540e drive 
connected as master to second IDE. 
 
In win98 the problem was successfully solved by installing 
the VIA ATAPI Vendor Support Driver from the CD. 
 
But all my work is in linux. 
 
The Teac drive is connected through 
ide-scsi interface to /dev/scd0 
(phisically the drive is the master on second controller, i.e. hdc) 
and all were worked fine before the upgrade. 
 
After the upgrade to 6via85t 
I discover that it works also fine while read/write 
"ordinary" data CD. 
 
But with an audioCD neither cdda2wav or cdparanoia 
don't work properly. It operates very slowly with error messages in 
/var/log/messages 
like these: 
 
 
Jun 3 00:49:20 localhost kernel: Attached scsi CD-ROM sr0 at scsi0, channel 
0, id 0, lun 0 
Jun 3 00:49:20 localhost kernel: sr0: scsi3-mmc drive: 48x/48x writer cd/rw 
xa/form2 cdda tray 
Jun 3 00:49:20 localhost kernel: Uniform CD-ROM driver Revision: 3.12 
Jun 3 00:49:50 localhost kernel: scsi : aborting command due to timeout : 
pid 60, scsi0, channel 0, id 0, lun 0 UNKNOWN( 
0xbe) 04 00 00 00 00 00 00 08 f8 00 00 
Jun 3 00:49:50 localhost kernel: hdc: lost interrupt 
Jun 3 00:50:00 localhost last message repeated 5 times 
Jun 3 00:50:00 localhost kernel: ide-scsi: The scsi wants to send us more 
data than expected - discarding data 
Jun 3 00:50:00 localhost kernel: ide-scsi: transferred 11640 of 11760 bytes 
Jun 3 00:50:32 localhost kernel: scsi : aborting command due to timeout : 
pid 312, scsi0, channel 0, id 0, lun 0 UNKNOWN 
(0xbe) 04 00 00 06 e4 00 00 08 f8 00 00 
Jun 3 00:50:32 localhost kernel: hdc: lost interrupt 
Jun 3 00:50:42 localhost last message repeated 5 times 
Jun 3 00:50:42 localhost kernel: ide-scsi: The scsi wants to send us more 
data than expected - discarding data 
Jun 3 00:50:42 localhost kernel: ide-scsi: transferred 11640 of 11760 bytes 
Jun 3 00:51:07 localhost anacron[816]: Job ^Cron.daily' terminated 
Jun 3 00:51:07 localhost anacron[816]: Normal exit (1 jobs run) 
Jun 3 00:51:12 localhost kernel: scsi : aborting command due to timeout : 
pid 319, scsi0, channel 0, id 0, lun 0 UNKNOWN 
(0xbe) 04 00 00 07 15 00 00 08 f8 00 00 
Jun 3 00:51:12 localhost kernel: hdc: lost interrupt 
Jun 3 00:51:12 localhost kernel: ide-scsi: The scsi wants to send us more 
data than expected - discarding data 
Jun 3 00:51:22 localhost kernel: hdc: lost interrupt 
Jun 3 00:51:22 localhost kernel: ide-scsi: The scsi wants to send us more 
data than expected - discarding data 
Jun 3 00:51:22 localhost kernel: hdc: lost interrupt 
Jun 3 00:51:22 localhost kernel: ide-scsi: The scsi wants to send us more 
data than expected - discarding data 
Jun 3 00:51:22 localhost kernel: hdc: lost interrupt 
Jun 3 00:51:22 localhost kernel: ide-scsi: The scsi wants to send us more 
data than expected - discarding data 
 
 
... 
 
 
My working linux is ALT Linux Master 2.2 
(http://www.altlinux.ru) 
with kernel24-up-2.4.20-alt5 
 
Can there be a solution? 
 
Many thanks in advance 
 
 
WBR 
 
Andrei 
 

================



 sms
 New Member
 
 Posts: 10
 Joined: Apr 2002 


 Monday, June 09, 2003 11:56 PM 






 I have the same problem. 
I use a K7T266 Pro 2 MSI board. 
Neither cdda2wav or cdparanoia will work properly. 
Both cause a kernel lock-up Missing interrupts and buffer over-flow. 
I am using RH9 2.4.20-18.9. 
I think it is a kernel problem but ... maybe also a Via issue. 
 
/dev/hdd causes imediate lock-up with cdparanoia. 
/dev/hdc will run until bad spot on audio cd and then cause lock-up. 
 
/dev/hdc: 
 
 Model=CD-ROM 48X/AKU, FwRev=T31, SerialNo= 
 Config={ SpinMotCtl Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic } 
 RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0 
 BuffType=unknown, BuffSize=0kB, MaxMultSect=0 
 (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0 
 IORDY=on/off, tPIO={min:227,w/IORDY:120}, tDMA={min:120,rec:150} 
 PIO modes: pio0 pio1 pio2 pio3 pio4 
 DMA modes: mdma0 mdma1 *mdma2 
 AdvancedPM=no 
 
/dev/hdd: 
 
 Model=Memorex 52MAXX 2452AJ, FwRev=6WS6, SerialNo= 
 Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic } 
 RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0 
 BuffType=unknown, BuffSize=0kB, MaxMultSect=0 
 (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0 
 IORDY=yes, tPIO={min:227,w/IORDY:120}, tDMA={min:120,rec:120} 
 PIO modes: pio0 pio1 pio2 pio3 pio4 
 DMA modes: mdma0 mdma1 mdma2 
 UDMA modes: udma0 udma1 *udma2 
 AdvancedPM=no 
 Drive conforms to: device does not report version: 5 
 
 
If anyone has a solution it would be appriciated. 
 
Steve 
 
 
===========================


А.