[Comm] help

[Андрей]

Здравствуйте.
У меня дистрибутив - ALT Junior 2.2.
Видео - ATI RADEON 8500 LE
Установил fglrx, который идет с диском...
В XF86Config заменил driver "radeon" на "fglrx".
После внесения изменений и перезагрузки компьютера,
Х-сервер не запустился...
Вот "свежий" лог:
 LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="Fire GL - ATI Research GmbH, Germany"
        compiled for 4.2.0, module version = 2.5.1
        Module class: XFree86 Video Driver
        ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
        compiled for 4.2.1.1, module version = 1.0.0
        Module class: XFree86 XInput Driver
        ABI class: XFree86 XInput driver, version 0.3
(II) FireGL8700/8800: Driver for chipset: ATI R200 QH (AGP),
        ATI R200 QL (AGP), ATI R200 QT (AGP), ATI R200 BB (AGP),
        Radeon RV250 Id (R9000), Radeon RV250 Ie (R9000),
        Radeon RV250 If (R9000), Radeon RV250 Ig (R9000),
        Radeon RV250 Ld (M9), Radeon RV250 Le (M9), Radeon RV250 Lf (M9),
        Radeon RV250 Lg (M9), Radeon R300 AD (R9500), Radeon R300 AE (R9500),
        Radeon R300 AF (R9500), Radeon R300 AG (Fire GL Z1/X1),
        Radeon R300 ND (R9700 Pro), Radeon R300 NE (R9700/R9500Pro),
        Radeon R300 NF (Unknown), Radeon R300 NG (Fire GL X1)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI R200 QL (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
<scip>
        [18] -1 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x081f4690
(II) resource ranges after probing:
        [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
<scip>
        [23] 0  0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
        compiled for 4.2.1.1, module version = 0.1.0
        ABI class: XFree86 Video Driver, version 0.5
(II) fglrx(0): PCI bus 1 card 0 func 0
(EE) fglrx(0): Given depth (16) is not supported by fglrx driver
(EE) fglrx(0): PreInitVisual failed
(EE) fglrx(0): R200PreInit failed
(II) fglrx(0): === [R200PreInit] === end
(II) UnloadModule: "fglrx"
(II) UnloadModule: "vgahw"
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found

Вот так, все ничего, но последние (ЕЕ) не дали запустить Х-сервер...
Как запустить 3D ускорение для моей видеокарты?
Заранее большое спасибо!!!
ПРОСЬБА: ПИСАТЬ МНЕ НА TAW88 на MAIL.RU
-- 
************
*  Андрей  *
************
ICQ: 201045832
E-MAIL: taw88 на mail.ru