[Comm] Re: ATI Rage 128 pro

Ср Апр 30 00:26:18 MSD 2003

В Втр, 29.04.2003, в 22:30, Konstantin Lepikhov написал:
> Hi Андрей!
> 
> Tuesday 29, at 09:26:11 AM you wrote:
> 
> > В Пнд, 28.04.2003, в 22:40, Konstantin Lepikhov написал:
> > 
> > > Проверьте, что в XF86Config-4 есть такие строки
> > > 
> > > Section "dri"
> > >     Mode 0666
> > > EndSection
> > Соответствует.
> > > 
> > > и что /dev/dri/ имеет права 755 и /dev/dri/card0 - 666
> > /dev/dri/  40755 и /dev/dri/card0  20666
> OK с этим все в порядке. Тогда высылайте свой XF86Config-4. На работе
> такая же карта прекрасно работает. Будем testcase создавать.
Не знаю, имеет ли это отношение, но в 12 консоли после сообщения, что не
может найти char-major-226, следующие сообщения о загрузке модуля drm c
agp и r128. Т.е. сначала не находит модулей, которые следом загружаются
?
-- 
С наилучшими пожеланиями, Андрей.
----------- следующая часть -----------

# File generated by XFdrake.

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

Section "Files"

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.

    FontPath   "unix/:-1"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

    # Uncomment this to cause a core dump at the spot where a signal is
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    #NoTrapSignals

    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    #DontZap

    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    #DontZoom

    # This  allows  the  server  to start up even if the
    # mouse device can't be opened/initialised.
    AllowMouseOpenFail

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "InputDevice"

    Identifier "Keyboard1"
    Driver      "Keyboard"
    Option "AutoRepeat"  "250 30"

    Option "XkbRules" "xfree86"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "ru"
    Option "XkbVariant"  "winkeys"
    Option "XkbOptions"  "grp:ctrl_shift_toggle"

EndSection

# **********************************************************************
# Pointer section
# **********************************************************************

Section "InputDevice"

    Identifier  "Mouse1"
    Driver      "mouse"
    Option "Protocol"    "PS/2"
    Option "Device"      "/dev/psaux"
    Option "Emulate3Buttons"
    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection

Section "Module"

# This loads the DBE extension module.

    Load	"dbe"

    Load	"glx"
    Load	"dri"

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.

    SubSection	"extmod"
	#Option	"omit xfree86-dga"

    EndSubSection

# This loads the Type1 and FreeType font modules

    Load	"type1"
    Load	"freetype"
EndSection

Section "DRI"
    Mode	0666
EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier "Iiyama|Iiyama MF-8617E/T, VisionMaster"
    VendorName "Iiyama"
    ModelName  "Unknown"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync  30-70

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50-160

# This is a set of extended mode timings typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.

# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480"    65.00 1024 1032 1176 1344   480  488  494  563 -hsync -vsync

# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
    Identifier "Generic VGA"
    Driver     "vga"
EndSection

Section "Device"
    Identifier  "ATI Rage 128"
    VendorName  "Unknown"
    BoardName   "Unknown"
    Driver      "r128"
#    VideoRam    32768
    # Clock lines

    # Uncomment following option if you see a big white block        
    # instead of the cursor!                                          
    #    Option      "sw_cursor"

    Option      "AGPMode"  "1"
    Option      "UseCCEFor2D"  "false"
    Option      "DPMS"  "on"
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

Section "Screen"
    Identifier "screen1"
    Device      "ATI Rage 128"
    Monitor     "Iiyama|Iiyama MF-8617E/T, VisionMaster"
    DefaultColorDepth 16
    Subsection "Display"
        Depth       8
        Modes       "1152x864" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       15
        Modes       "1152x864" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1152x864" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1152x864" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes       "1152x864" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection

Section "ServerLayout"
    Identifier "layout1"
    Screen     "screen1"

    InputDevice "Mouse1" "CorePointer"

    InputDevice "Keyboard1" "CoreKeyboard"
EndSection