[Comm] Re: ATI Rage 128 pro

Андрей Новосёлов =?iso-8859-1?q?ksynolog_=CE=C1_aip=2Emk=2Eua?=
Пн Апр 28 02:30:25 MSD 2003


В Вск, 27.04.2003, в 22:55, Sergey Degtyaryov написал:

> А лог XFree86 пришлете?
Высылаю.
-- 
С наилучшими пожеланиями, Андрей.
----------- следующая часть -----------

This is a pre-release version of XFree86, and is not supported in any
way.  Bugs may be reported to XFree86 на XFree86.Org and patches submitted
to fixes на XFree86.Org.  Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)

XFree86 Version 4.2.1.1 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 18 October 2002
	If the server is older than 6-12 months, or if your card is
	newer than the above date, look for a newer version before
	reporting problems.  (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.20-alt1-smp i686 [ELF] 
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.9.log", Time: Sat Apr 26 23:10:55 2003
(++) Using config file: "/etc/X11/XF86Config.test-4"
(==) ServerLayout "layout1"
(**) |-->Screen "screen1" (0)
(**) |   |-->Monitor "Iiyama|Iiyama MF-8617E/T, VisionMaster"
(**) |   |-->Device "ATI Rage 128"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "250 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "ru"
(**) XKB: layout: "ru"
(**) Option "XkbVariant" "winkeys"
(**) XKB: variant: "winkeys"
(**) Option "XkbOptions" "grp:ctrl_shift_toggle"
(**) XKB: options: "grp:ctrl_shift_toggle"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "unix/:-1"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail"
Using vt 8
(--) using VT number 8

(II) Open APM successful
(II) Module ABI versions:
	XFree86 ANSI C Emulation: 0.1
	XFree86 Video Driver: 0.5
	XFree86 XInput driver : 0.3
	XFree86 Server Extension : 0.1
	XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.2.1.1, module version = 1.0.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.2.1.1, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80000058, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1130 card 8086,1130 rev 04 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,1131 card 0000,0000 rev 04 class 06,04,00 hdr 01
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 11 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,2440 card 0000,0000 rev 11 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,244b card 0000,0000 rev 11 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2442 card 0000,0000 rev 11 class 0c,03,00 hdr 00
(II) PCI: 00:1f:4: chip 8086,2444 card 0000,0000 rev 11 class 0c,03,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5446 card 1458,4003 rev 00 class 03,00,00 hdr 00
(II) PCI: 02:01:0: chip 1073,000d card 1073,000d rev 03 class 04,01,00 hdr 00
(II) PCI: 02:05:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
	compiled for 4.2.1.1, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1	0x00009000 - 0x000090ff (0x100) IX[B]
	[1] -1	0x00009400 - 0x000094ff (0x100) IX[B]
	[2] -1	0x00009800 - 0x000098ff (0x100) IX[B]
	[3] -1	0x00009c00 - 0x00009cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0xd8000000 - 0xd9ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0xd4000000 - 0xd7ffffff (0x4000000) MX[B]
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x06 (VGA_EN is cleared)
(II) Bus 2 I/O range:
	[0] -1	0x0000a000 - 0x0000a0ff (0x100) IX[B]
	[1] -1	0x0000a400 - 0x0000a4ff (0x100) IX[B]
	[2] -1	0x0000a800 - 0x0000a8ff (0x100) IX[B]
	[3] -1	0x0000ac00 - 0x0000acff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
	[0] -1	0xda000000 - 0xdbffffff (0x2000000) MX[B]
(II) Bus 2 prefetchable memory range:
(II) Bus -1: bridge is at (0:31:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(1:0:0) ATI Rage 128 Pro TF rev 0, Mem @ 0xd4000000/26, 0xd9000000/14, I/O @ 0x9000/8
(II) Addressable bus resource ranges are
	[0] -1	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
	[0] -1	0xdb008000 - 0xdb0080ff (0x100) MX[B]
	[1] -1	0xdb000000 - 0xdb007fff (0x8000) MX[B]
	[2] -1	0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
	[3] -1	0xd9000000 - 0xd9003fff (0x4000) MX[B](B)
	[4] -1	0xd4000000 - 0xd7ffffff (0x4000000) MX[B](B)
	[5] -1	0x0000a000 - 0x0000a0ff (0x100) IX[B]
	[6] -1	0x0000b800 - 0x0000b81f (0x20) IX[B]
	[7] -1	0x0000b000 - 0x0000b01f (0x20) IX[B]
	[8] -1	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[9] -1	0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0xdb008000 - 0xdb0080ff (0x100) MX[B]
	[1] -1	0xdb000000 - 0xdb007fff (0x8000) MX[B]
	[2] -1	0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
	[3] -1	0xd9000000 - 0xd9003fff (0x4000) MX[B](B)
	[4] -1	0xd4000000 - 0xd7ffffff (0x4000000) MX[B](B)
	[5] -1	0x0000a000 - 0x0000a0ff (0x100) IX[B]
	[6] -1	0x0000b800 - 0x0000b81f (0x20) IX[B]
	[7] -1	0x0000b000 - 0x0000b01f (0x20) IX[B]
	[8] -1	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[9] -1	0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0xdb008000 - 0xdb0080ff (0x100) MX[B]
	[6] -1	0xdb000000 - 0xdb007fff (0x8000) MX[B]
	[7] -1	0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
	[8] -1	0xd9000000 - 0xd9003fff (0x4000) MX[B](B)
	[9] -1	0xd4000000 - 0xd7ffffff (0x4000000) MX[B](B)
	[10] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[11] -1	0x00000000 - 0x000000ff (0x100) IX[B]
	[12] -1	0x0000a000 - 0x0000a0ff (0x100) IX[B]
	[13] -1	0x0000b800 - 0x0000b81f (0x20) IX[B]
	[14] -1	0x0000b000 - 0x0000b01f (0x20) IX[B]
	[15] -1	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[16] -1	0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
	compiled for 4.2.1.1, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
	compiled for 4.2.1.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
	compiled for 4.2.1.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
	compiled for 4.2.1.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
	compiled for 4.2.1.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
	compiled for 4.2.1.1, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
	compiled for 4.2.1.1, module version = 1.0.1
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
	compiled for 4.2.1.1, module version = 1.1.10
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "r128"
(II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o
(II) Module r128: vendor="The XFree86 Project"
	compiled for 4.2.1.1, module version = 4.0.1
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
	compiled for 4.2.1.1, module version = 6.4.8
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
	compiled for 4.2.1.1, module version = 1.0.0
	Module class: XFree86 XInput Driver
	ABI class: XFree86 XInput driver, version 0.3
(II) ATI: ATI driver (version 6.4.8) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
	ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
	ATI Rage 128 RL (AGP), ATI Rage 128 SE (PCI), ATI Rage 128 SF (AGP),
	ATI Rage 128 SG (AGP), ATI Rage 128 SH (PCI), ATI Rage 128 SK (PCI),
	ATI Rage 128 SL (AGP), ATI Rage 128 SM (AGP), ATI Rage 128 SN (PCI),
	ATI Rage 128 Pro PA (PCI), ATI Rage 128 Pro PB (AGP),
	ATI Rage 128 Pro PC (AGP), ATI Rage 128 Pro PD (PCI),
	ATI Rage 128 Pro PE (AGP), ATI Rage 128 Pro PF (AGP),
	ATI Rage 128 Pro PG (PCI), ATI Rage 128 Pro PH (AGP),
	ATI Rage 128 Pro PI (AGP), ATI Rage 128 Pro PJ (PCI),
	ATI Rage 128 Pro PK (AGP), ATI Rage 128 Pro PL (AGP),
	ATI Rage 128 Pro PM (PCI), ATI Rage 128 Pro PN (AGP),
	ATI Rage 128 Pro PO (AGP), ATI Rage 128 Pro PP (PCI),
	ATI Rage 128 Pro PQ (AGP), ATI Rage 128 Pro PR (PCI),
	ATI Rage 128 Pro PS (PCI), ATI Rage 128 Pro PT (AGP),
	ATI Rage 128 Pro PU (AGP), ATI Rage 128 Pro PV (PCI),
	ATI Rage 128 Pro PW (AGP), ATI Rage 128 Pro PX (AGP),
	ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL (AGP),
	ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Pro ULTRA TU (AGP),
	ATI Rage 128 Mobility LE (PCI), ATI Rage 128 Mobility LF (AGP),
	ATI Rage 128 Mobility MF (AGP), ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon A3 Integrated,
	ATI Radeon A4 Integrated, ATI Radeon QD (AGP), ATI Radeon QE (AGP),
	ATI Radeon QF (AGP), ATI Radeon QG (AGP), ATI Radeon VE QY (AGP),
	ATI Radeon VE QZ (AGP), ATI Radeon Mobility LW (AGP),
	ATI Radeon Mobility LX (AGP), ATI Radeon Mobility LY (AGP),
	ATI Radeon Mobility LZ (AGP), ATI Radeon 8500 QH (AGP),
	ATI Radeon 8500 QI (AGP), ATI Radeon 8500 QJ (AGP),
	ATI Radeon 8500 QK (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 8500 QN (AGP), ATI Radeon 8500 QO (AGP),
	ATI Radeon 8500 Qh (AGP), ATI Radeon 8500 Qi (AGP),
	ATI Radeon 8500 Qj (AGP), ATI Radeon 8500 Qk (AGP),
	ATI Radeon 8500 Ql (AGP), ATI Radeon 8500 BB (AGP),
	ATI Radeon 7500 QW (AGP), ATI Radeon 7500 QX (AGP),
	ATI Radeon 9000 QT (AGP)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ATI Rage 128 Pro ULTRA TF (AGP) found
(II) Loading sub module "r128"
(II) LoadModule: "r128"
(II) Reloading /usr/X11R6/lib/modules/drivers/r128_drv.o
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0xdb008000 - 0xdb0080ff (0x100) MX[B]
	[6] -1	0xdb000000 - 0xdb007fff (0x8000) MX[B]
	[7] -1	0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
	[8] -1	0xd9000000 - 0xd9003fff (0x4000) MX[B](B)
	[9] -1	0xd4000000 - 0xd7ffffff (0x4000000) MX[B](B)
	[10] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[11] -1	0x00000000 - 0x000000ff (0x100) IX[B]
	[12] -1	0x0000a000 - 0x0000a0ff (0x100) IX[B]
	[13] -1	0x0000b800 - 0x0000b81f (0x20) IX[B]
	[14] -1	0x0000b000 - 0x0000b01f (0x20) IX[B]
	[15] -1	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[16] -1	0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) resource ranges after probing:
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0xdb008000 - 0xdb0080ff (0x100) MX[B]
	[6] -1	0xdb000000 - 0xdb007fff (0x8000) MX[B]
	[7] -1	0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
	[8] -1	0xd9000000 - 0xd9003fff (0x4000) MX[B](B)
	[9] -1	0xd4000000 - 0xd7ffffff (0x4000000) MX[B](B)
	[10] 0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[11] 0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[12] 0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[13] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[14] -1	0x00000000 - 0x000000ff (0x100) IX[B]
	[15] -1	0x0000a000 - 0x0000a0ff (0x100) IX[B]
	[16] -1	0x0000b800 - 0x0000b81f (0x20) IX[B]
	[17] -1	0x0000b000 - 0x0000b01f (0x20) IX[B]
	[18] -1	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[19] -1	0x00009000 - 0x000090ff (0x100) IX[B](B)
	[20] 0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[21] 0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
	compiled for 4.2.1.1, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.5
(II) R128(0): PCI bus 1 card 0 func 0
(**) R128(0): Depth 16, (--) framebuffer bpp 16
(II) R128(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp pixmaps)
(==) R128(0): Default visual is TrueColor
(**) R128(0): Option "AGPMode" "1"
(==) R128(0): RGB weight 565
(II) R128(0): Using 6 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
	compiled for 4.2.1.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.5
(II) R128(0): initializing int10
(II) R128(0): Primary V_BIOS segment is: 0xc000
(--) R128(0): Chipset: "ATI Rage 128 Pro ULTRA TF (AGP)" (ChipID = 0x5446)
(--) R128(0): Linear framebuffer at 0xd4000000
(--) R128(0): MMIO registers at 0xd9000000
(--) R128(0): VideoRAM: 32768 kByte (128-bit SDR SGRAM 1:1)
(**) R128(0): Using external CRT for display
(WW) R128(0): Can't determine panel dimensions, and none specified. 		              Disabling programming of FP registers.
(II) R128(0): PLL parameters: rf=2950 rd=65 min=12500 max=35000; xclk=12000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
	compiled for 4.2.1.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
	compiled for 4.2.1.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.5
(II) R128(0): VESA BIOS detected
(II) R128(0): VESA VBE Version 2.0
(II) R128(0): VESA VBE Total Mem: 32768 kB
(II) R128(0): VESA VBE OEM: ATI RAGE128
(II) R128(0): VESA VBE OEM Software Rev: 1.0
(II) R128(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) R128(0): VESA VBE OEM Product: R128
(II) R128(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) R128(0): VESA VBE DDC supported
(II) R128(0): VESA VBE DDC Level none
(II) R128(0): VESA VBE DDC transfer in appr. 2 sec.
(II) R128(0): VESA VBE DDC read failed
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(==) R128(0): Write-combining range (0xd4000000,0x2000000)
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
	compiled for 4.2.1.1, module version = 1.2.0
	ABI class: XFree86 Video Driver, version 0.5
(II) R128(0): I2C bus "DDC" initialized.
(II) R128(0): I2C device "DDC:ddc2" registered.
(II) R128(0): I2C device "DDC:ddc2" removed.
(EE) R128(0): No DFP detected
(II) R128(0): Iiyama|Iiyama MF-8617E/T, VisionMaster: Using hsync range of 30.00-70.00 kHz
(II) R128(0): Iiyama|Iiyama MF-8617E/T, VisionMaster: Using vrefresh range of 50.00-160.00 Hz
(II) R128(0): Clock range:  12.50 to 350.00 MHz
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "640x512" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "640x512" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (hsync out of range)
(II) R128(0): Not using default mode "896x672" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (hsync out of range)
(II) R128(0): Not using default mode "896x672" (hsync out of range)
(II) R128(0): Not using default mode "1856x1392" (hsync out of range)
(II) R128(0): Not using default mode "928x696" (hsync out of range)
(II) R128(0): Not using default mode "1856x1392" (hsync out of range)
(II) R128(0): Not using default mode "928x696" (hsync out of range)
(II) R128(0): Not using default mode "1920x1440" (hsync out of range)
(II) R128(0): Not using default mode "960x720" (hsync out of range)
(II) R128(0): Not using default mode "1920x1440" (hsync out of range)
(II) R128(0): Not using default mode "960x720" (hsync out of range)
(II) R128(0): Not using default mode "1152x864" (hsync out of range)
(II) R128(0): Not using default mode "576x432" (hsync out of range)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using default mode "700x525" (hsync out of range)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using default mode "700x525" (hsync out of range)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using default mode "700x525" (hsync out of range)
(II) R128(0): Not using default mode "1920x1200" (hsync out of range)
(II) R128(0): Not using default mode "960x600" (hsync out of range)
(--) R128(0): Virtual size is 1152x864 (pitch 1152)
(**) R128(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) R128(0): Modeline "1152x864"  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync
(**) R128(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) R128(0): Modeline "1024x768"   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync
(**) R128(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) R128(0): Modeline "800x600"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) R128(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) R128(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 -hsync -vsync
(==) R128(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
	compiled for 4.2.1.1, module version = 1.0.0
	ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
	compiled for 4.2.1.1, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
	compiled for 4.2.1.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.5
(**) R128(0): Using AGP 1x mode
(!!) R128(0): For information on using the multimedia capabilities
 of this adapter, please see http://gatos.sf.net.
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0xd9000000 - 0xd9003fff (0x4000) MS[B]
	[1] 0	0xd4000000 - 0xd7ffffff (0x4000000) MS[B]
	[2] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[3] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[4] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[5] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[6] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[7] -1	0xdb008000 - 0xdb0080ff (0x100) MX[B]
	[8] -1	0xdb000000 - 0xdb007fff (0x8000) MX[B]
	[9] -1	0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
	[10] -1	0xd9000000 - 0xd9003fff (0x4000) MX[B](B)
	[11] -1	0xd4000000 - 0xd7ffffff (0x4000000) MX[B](B)
	[12] 0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[13] 0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[14] 0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[15] 0	0x00009000 - 0x000090ff (0x100) IS[B]
	[16] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[17] -1	0x00000000 - 0x000000ff (0x100) IX[B]
	[18] -1	0x0000a000 - 0x0000a0ff (0x100) IX[B]
	[19] -1	0x0000b800 - 0x0000b81f (0x20) IX[B]
	[20] -1	0x0000b000 - 0x0000b01f (0x20) IX[B]
	[21] -1	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[22] -1	0x00009000 - 0x000090ff (0x100) IX[B](B)
	[23] 0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[24] 0	0x000003c0 - 0x000003df (0x20) IS[B]
(==) R128(0): Write-combining range (0xd4000000,0x2000000)
(WW) R128(0): Cannot read colourmap from VGA.  Will restore with default
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmGetBusid returned 'PCI:1:0:0'
drmOpenDevice: minor is 1
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 2
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 3
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 4
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 5
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 6
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 7
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 8
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 9
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 10
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 11
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 12
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 13
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 14
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: busid is PCI:1:0:0
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: drmOpenMinor returns 13
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(II) R128(0): [drm] drmSetBusid failed (13, PCI:1:0:0), Device or resource busy
(EE) R128(0): [dri] DRIScreenInit failed.  Disabling DRI.
(II) R128(0): Memory manager initialized to (0,0) (1152,8191)
(II) R128(0): Reserved area from (0,864) to (1152,866)
(II) R128(0): Largest offscreen area available: 1152 x 7325
(==) R128(0): Backing store disabled
(==) R128(0): Silken mouse enabled
(II) R128(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Dashed Lines
	Scanline Image Writes
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		32 128x128 slots
		32 256x256 slots
		16 512x512 slots
(II) R128(0): Acceleration enabled
(II) R128(0): Using hardware cursor (scanline 1732)
(II) R128(0): Largest offscreen area available: 1152 x 7323
(**) Option "dpms" "on"
(**) R128(0): DPMS enabled
(WW) R128(0): Option "UseCCEFor2D" is not used
(II) R128(0): Direct rendering disabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "PS/2"
(**) Mouse1: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons"
(**) Option "Emulate3Timeout" "50"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse1: Buttons: 3
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Open APM successful
(==) R128(0): Write-combining range (0xd4000000,0x2000000)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmGetBusid returned 'PCI:1:0:0'
drmOpenDevice: minor is 1
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 2
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 3
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 4
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 5
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 6
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 7
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 8
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 9
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 10
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 11
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 12
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 13
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 14
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: busid is PCI:1:0:0
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: drmOpenMinor returns 13
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(II) R128(0): [drm] drmSetBusid failed (13, PCI:1:0:0), Device or resource busy
(EE) R128(0): [dri] DRIScreenInit failed.  Disabling DRI.
(II) R128(0): Memory manager initialized to (0,0) (1152,8191)
(II) R128(0): Reserved area from (0,864) to (1152,866)
(II) R128(0): Largest offscreen area available: 1152 x 7325
(II) R128(0): Acceleration enabled
(II) R128(0): Using hardware cursor (scanline 1732)
(II) R128(0): Largest offscreen area available: 1152 x 7323
(**) R128(0): DPMS enabled
(II) R128(0): Direct rendering disabled
(II) Open APM successful
(==) R128(0): Write-combining range (0xd4000000,0x2000000)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmGetBusid returned 'PCI:1:0:0'
drmOpenDevice: minor is 1
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 2
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 3
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 4
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 5
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 6
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 7
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 8
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 9
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 10
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 11
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 12
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 13
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 14
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: busid is PCI:1:0:0
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: drmOpenMinor returns 13
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(II) R128(0): [drm] drmSetBusid failed (13, PCI:1:0:0), Device or resource busy
(EE) R128(0): [dri] DRIScreenInit failed.  Disabling DRI.
(II) R128(0): Memory manager initialized to (0,0) (1152,8191)
(II) R128(0): Reserved area from (0,864) to (1152,866)
(II) R128(0): Largest offscreen area available: 1152 x 7325
(II) R128(0): Acceleration enabled
(II) R128(0): Using hardware cursor (scanline 1732)
(II) R128(0): Largest offscreen area available: 1152 x 7323
(**) R128(0): DPMS enabled
(II) R128(0): Direct rendering disabled


Подробная информация о списке рассылки community