[Comm] gprs -irda -pppd

[Michael Bykov]

Настроил gprs по IR на Toshibe, телефон видится и звонит,
работает. Но когда стартую $pppd call gprs-moto, скрипт
/etc/ppp/ip-up стартует и тут же вываливается. 

В чем может быть дело - я указал user mtu, пароль тоже mtu, это
правильно, кто-нибудь звонит по gprs в MTU?

Вот лог, настройки вышлю мылом если надо:

$pppd call gprs-moto

GPRS modem init: press <ctrl>-C to disconnect
 + defining PDP context
 + defining QoS requirements
 + attaching to GPRS
 + requesting data connection
 + connected
Serial connection established.
using channel 7
Using interface ppp0
Connect: ppp0 <--> /dev/ircomm0
rcvd [LCP TermReq id=0x1b]
sent [LCP ConfReq id=0x1 <asyncmap 0x20a0000> <magic 0x4eb78b8c> <pcomp> <accomp>]
sent [LCP TermAck id=0x1b]
rcvd [LCP TermReq id=0x1b]
sent [LCP TermAck id=0x1b]
rcvd [LCP ConfReq id=0x1d <mru 2000> <asyncmap 0xa0000> <pcomp> <accomp> <magic 0x191eee5e> <auth pap>]
sent [LCP ConfAck id=0x1d <mru 2000> <asyncmap 0xa0000> <pcomp> <accomp> <magic 0x191eee5e> <auth pap>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x20a0000> <magic 0x4eb78b8c> <pcomp> <accomp>]
sent [PAP AuthReq id=0x1 user="mtu" password=<hidden>]
rcvd [PAP AuthAck id=0x1 ""]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0>]
sent [CCP ConfReq id=0x1 <deflate 15 18 04 78 00 15 03 2f]
rcvd [IPCP ConfNak id=0x1 <addr 192.168.100.100>]
sent [IPCP ConfReq id=0x2 <addr 192.168.100.100>]
rcvd [IPCP ConfReq id=0x1 <addr 192.168.100.100>]
sent [IPCP ConfAck id=0x1 <addr 192.168.100.100>]
rcvd [LCP ProtRej id=0x1e 80 fd 01 01 00 0f 1a 04 78 00 18 04 78]
rcvd [IPCP ConfAck id=0x2 <addr 192.168.100.100>]
local  IP address 192.168.100.100
remote IP address 192.168.100.100
Script /etc/ppp/ip-up started (pid 5354)
Script /etc/ppp/ip-up finished (pid 5354), status = 0x0
rcvd [LCP TermReq id=0x1f]
LCP terminated by peer
Script /etc/ppp/ip-down started (pid 5447)
sent [LCP TermAck id=0x1f]
Script /etc/ppp/ip-down finished (pid 5447), status = 0x0
rcvd [LCP TermReq id=0x1f]
sent [LCP TermAck id=0x1f]
Connection terminated.
Connect time 2.6 minutes.
Sent 45 bytes, received 30 bytes.
 + sending break
 + dropping data connection
disconnect script failed




-- 


M.