[Comm] CD-RW : cdrecord iInput/output error.

[fisk]

Народ, Помогите пожалуйста.

Пытаюсь писать rw диск с помощью cdrecord. Выдает ошибку страшно дикую. В
мане говорится про нее, как ошибку, связанную с ядром.
Что делать?

Вывод stdin:

Cdrecord 1.11a19 (i586-alt-linux-gnu) Copyright (C) 1995-2002 Jцrg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.6'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'SONY    '
Identifikation : 'CD-RW  CRX175E2 '
Revision       : 'S002'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 1359872 = 1328 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data  650 MB
Total size:     746 MB (73:57.36) = 332802 sectors
Lout start:     746 MB (73:59/27) = 332802 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Reference speed: 2
  Is not unrestricted
  Is erasable
  ATIP start of lead in:  -11745 (97:25/30)
  ATIP start of lead out: 336156 (74:44/06)
  speed low: 0 speed high: 4
  power mult factor: 4 6
  recommended erase/write power: 5
  A2 values: 00 00 00
Disk type:    Phase change
Manuf. index: 40
Manufacturer: INFODISC Technology Co., Ltd.
Blocks total: 336156 Blocks current: 336156 Blocks remaining: 3354

Вывод stderr:

scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.22
cdrecord: Input/output error. blank unit: scsi sendcmd: no error
CDB:  A1 01 00 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0C 00 00 00 00 73 03 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 19.934s timeout 9600s
cdrecord: fifo had 64 puts and 0 gets.
cdrecord: fifo was 0 times empty and 1 times full, min fill was 0%.

М.Фисков
fisk на kmk.enisey.ru
info на kmk.enisey.ru