[Comm] Failed to initialize the NVdriver kernel module!

[Evgen Osiptsov]

Здравствуйте.Помогите новичку.
Установил 4-ые окна поставил NVIDIA_GLX  и ядро.
Подправил XF86Config-4(идёт аттачем).
Но выдает ошибку при загрузке X:
"Failed to initialize the NVdriver kernel module!"

В факе NVIDIA прочёл следуюее
==============================================================
Q: My X server fails to start, and my XFree86 log file contains the error:

"(EE) NVIDIA(0): Failed to initialize the NVdriver kernel module!"

A: Nothing will work if the NVdriver kernel module doesn't function
properly. If you see anything in the X log file like "(EE) NVIDIA(0):
Failed to initialize the NVdriver kernel module!" then there is
most likely a problem with the NVdriver kernel module. First, you
should verify that if you installed from rpm that the rpm was built
specifically for the kernel you are using. You should also check
that the module is loaded ('/sbin/lsmod'); if it is not loaded try
loading it explicitly with 'insmod' or 'modprobe' (be sure to exit the
X server before installing a new kernel module). If you receive errors
about unresolved symbols, then the kernel module has most likely been
built using header files for a different kernel revision than what
you are running. You can explicitly control what kernel header files
are used by building NVdriver from the NVIDIA_kernel tar file with:
'make install SYSINCLUDE=/path/to/kernel/headers'.

Please note that the convention for the location of kernel
header files is in a state of transition, as is the location
of kernel modules. If the kernel module fails to load properly,
modprobe/insmod may be trying to load an older kernel module (assuming
you've upgraded). cd'ing into the directory with the new kernel
module and doing 'insmod ./NVdriver' may help.

Finally, the NVdriver may print error messages indicating a problem --
to view these messages please check /var/log/messages, or wherever
syslog is directed to place kernel messages.
==============================================================

Я так и не понял, что мне надо сделать конкретно.
Поставитьновое ядро? Или что?

Подскажите плиз чайнику :-)

-- 
С уважением,
 Evgen                          mailto:osipcov на stels.net
----------- следующая часть -----------
Было удалено вложение не в текстовом формате...
Имя     : XF86Config-4.
Тип     : application/octet-stream
Размер  : 6500 байтов
Описание: =?iso-8859-1?q?=CF=D4=D3=D5=D4=D3=D4=D7=D5=C5=D4?=
Url     : <http://lists.altlinux.org/pipermail/community/attachments/20021105/711ce03e/attachment-0004.obj>
----------- следующая часть -----------
Было удалено вложение не в текстовом формате...
Имя     : XFree86.0.log
Тип     : application/octet-stream
Размер  : 13197 байтов
Описание: =?iso-8859-1?q?=CF=D4=D3=D5=D4=D3=D4=D7=D5=C5=D4?=
Url     : <http://lists.altlinux.org/pipermail/community/attachments/20021105/711ce03e/attachment-0005.obj>