[mdk-re] SAMBA

[cornet]

Alting wrote:
> 
> ГРЕБАНАЯ САМБА!!!!!!!!!!
> Нифига не работает. Если ваяю файл в блокноте, все нормально. Можно
> прямо с сервера его открыть, подредактировать и сохранить.
> А с Вордом - фиг. Не могу, говорит, сохранить изменения. Хоть ты
> тресни!
> Я уж и три семерки поставил на шару, и оплоки все прошерстил.
> Результат - 0 :(((
> Если посмотреть на права файла из НТ-вого клиента - все нормально. Все
> права есть. А Ворд, гад, ругается! Не могу говорит, сохранить файл -
> папка только для чтения! Что ему, 0777 мало? Может 0888 поставить? ;)
> Люди! Еще раз прошу, умоляю, пожалуйста, у кого работает такая штука,
> как редактирование файлов Word и Excel на сетевом диске под самбой:
> пришлите мне кусок smb.conf с точным описанием на шару.
> Может, как-то можно заставить клиентов видеть файловую систему на
> самбе не как NTFS, а как FAT32? Там параметр "безопасность" не
> работает. А в нем, похоже, вся загвоздка.
> Хотя, у меня не работает как на НТ-вых клиентах, так и 98-х..
> 
> Hello Gennady,
> 
> Wednesday, February 14, 2001, 10:48:53 PM, you wrote:
> 
> GVT> Приветствую Alting,
> 
> GVT> 14 февраля 2001 г., 21:44:24, было сказано:
> 
> GVT> скип...
> 
> A>> посмотрел, что пишет про открытые на сервере файлы smbstatus:
> A>> Там в графе DenyMode стоит DENY_NONE, а в графе R/W стоит RDONLY.
> A>> А почему RDONLY ? Я же расшаривал папку на запись!
> A>> Может не стоит писать в smb.conf строчку force user = root ?
> A>> У кого решена эта проблема, напишите, как у вас это выглядит в
> A>> smbstatus. И как вы побороли эту проблему? Что прописать для шары в
> A>> smb.conf ?
> 
> GVT> У меня выглядит так:
> 
> GVT> smbstatus:
> GVT> ...
> GVT> 10838  DENY_NONE  RDWR       EXCLUSIVE+BATCH  /public/etc/Rep/февраль.xls
> GVT> 10746  DENY_WRITE RDONLY     EXCLUSIVE+BATCH  /public/games/Игры для всех/Р-П-Г/ALLODS 2.pif
> GVT> ...
> GVT> в smb.conf все просто:
> GVT>          guest ok  = No
> GVT>          read only = No
> 
> GVT> Работает все.
> GVT> Че еще сказать могу? %-/
> GVT> Естественно с правами доступа повозился в начале,
> GVT> с чарсет/кодпейдж тоже, шоб по-русски файлы обзывать можно было.
> GVT> Во вспомнил, как раз когда у меня кодпейдж не выставлен был, тогда и
> GVT> ошибку такую же я получал...
> 
> --
> Best regards,
>  Alting                            mailto:alting на mail.ru

Высылаю, у меня все Ok и в хоумниках юзверей и в ресурсе общего обмена
Exchange, все открывается и редактируется всеми офисами и маздаями :-))
Самба самосборная 2.0.7

-- 
******** FIRE & STEEL ********
----------- следующая часть -----------
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash) 
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not many any basic syntactic errors. 
#
#======================= Global Settings =====================================
[global]


map to guest = Bad User
max open files = 1000


# workgroup = NT-Domain-Name or Workgroup-Name
   workgroup = RICHFOR


# server string is the equivalent of the NT Description field
   server string = PRO Samba Server 2.0.7

# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
;   hosts allow = 192.168.1. 192.168.2. 127.
;   hosts allow = 195.96.73. 127.

# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
;   printcap name = /etc/printcap
;   load printers = yes

# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
;   printing = bsd

# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
  guest account = pcguest

# this tells Samba to use a separate log file for each machine
# that connects
   log file = /usr/local/samba/var/log.%m

# Put a capping on the size of the log files (in Kb).
   max log size = 5000

# Security mode. Most people will want user level security. See
# security_level.txt for details.
   security = user
# Use password server option only with security = server
;   password server = <NT-Server-Name>

# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
;  password level = 8
;  username level = 8

# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
  encrypt passwords = yes
  smb passwd file = /etc/smbpasswd

# The following are needed to allow password changing from Windows to
# update the Linux sytsem password also.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
#        the encrypted SMB passwords. They allow the Unix password
#        to be kept in sync with the SMB password.
;  unix password sync = Yes
;  passwd program = /usr/bin/passwd %u
;  passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*

# Unix users can map to different SMB User names
;  username map = /etc/smbusers

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
   socket options = TCP_NODELAY 

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
;   interfaces = 192.168.12.2/24 192.168.13.2/24 

# Configure remote browse list synchronisation here
#  request announcement to, or browse list sync from:
#	a specific host or from / to a whole subnet (see below)
;   remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
;   remote announce = 192.168.1.255 192.168.2.44

# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
   local master = yes

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
   os level = 80

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
   domain master = yes 

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
   preferred master = yes

# Use only if you have an NT server on your network that has been
# configured at install time to be a primary domain controller.
;   domain controller = <NT-Domain-Controller-SMBName>

# Enable this if you want Samba to be a domain logon server for 
# Windows95 workstations. 
   domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
;   logon script = %m.bat
# run a specific logon batch file per username
;   logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
#        %L substitutes for this servers netbios name, %U is username
#        You must uncomment the [Profiles] share below
;   logon path = \\%L\Profiles\%U

# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be specified
# the default order is "host lmhosts wins bcast". "host" means use the unix
# system gethostbyname() function call that will use either /etc/hosts OR
# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that are NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
; name resolve order = wins lmhosts bcast

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
   wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
#	Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one	WINS Server on the network. The default is NO.
   wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
   dns proxy = no 

# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
;  preserve case = no
;  short preserve case = no
# Default case is normally upper case for all DOS files
;  default case = lower
# Be very careful with case sensitivity - it can break things!
;  case sensitive = no
client codepage = 866
character set = koi8-r

#============================ Share Definitions ==============================
[homes]
   comment = Home Directories
   browseable = no
   writable = yes

# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
;   comment = Network Logon Service
;   path = /home/netlogon
;   guest ok = yes
;   writable = no
;   share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
;    path = /home/profiles
;    browseable = no
;    guest ok = yes


# NOTE: If you have a BSD-style print system there is no need to 
# specifically define each individual printer
#[printers]
#   comment = All Printers
#   path = /var/spool/samba
#   browseable = no
# Set public = yes to allow user 'guest account' to print
#   guest ok = no
#   writable = no
#   printable = yes

# This one is useful for people to share files
;[tmp]
;   comment = Temporary file space
;   path = /tmp
;   read only = no
;   public = yes

# A publicly accessible directory, but read only, except for people in
# the "staff" group
[General]
   comment = Public Stuff
   path = /u/General
   public = no
   writable = yes
   printable = no
   write list = root,cornet

[Programms]
   comment = Remout Programms
   path = /u/Programms
   public = no
   writable = yes
   printable = no
   write list = root,cornet

[Exchange]
;   comment = Public Stuff
   path = /u/Exchange
   public = no
   writable = yes
   printable = no
;   write list = root,cornet

# Other examples. 
#
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
;   comment = Fred's Printer
;   valid users = fred
;   path = /homes/fred
;   printer = freds_printer
;   public = no
;   writable = no
;   printable = yes

# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
;   comment = Fred's Service
;   path = /usr/somewhere/private
;   valid users = fred
;   public = no
;   writable = yes
;   printable = no

# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %u option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
;  comment = PC Directories
;  path = /usr/pc/%m
;  public = no
;  writable = yes

# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
;   path = /usr/somewhere/else/public
;   public = yes
;   only guest = yes
;   writable = yes
;   printable = no

# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.

;[myshare]
;   comment = Mary's and Fred's stuff
;   path = /usr/somewhere/shared
;   valid users = mary fred
;   public = no
;   writable = yes
;   printable = no
;   create mask = 0765