[mdk-re] Kernel compiling problem

[Artem K.Jouravsky]

On Mon, 23 Apr 2001 18:26:11 +0400 (MSD)
Roman S <rromas на mailru.com> wrote:

RS> Цитирую Vladimir A Gavrilyuk <vlan на icb.spb.su>:
RS> 
RS> > Привет всем!
RS> > 
RS> > Решил пересобрать ядрышко, делаю так:
RS> > make mrproper
RS> > .....
RS> 
RS> rpm -qa | grep gcc
RS> Или сразу колитесь, гсс-компат стоит?
RS> 
А у меня вот так вот ругается на 
rpm --rebuild kernel-2.2.19-alt2.src.rpm
при этом 
[ujo на ninth SRPMS]$ rpm -qa|grep gcc
gcc-2.96-ipl9mdk
gcc-c++-2.96-ipl9mdk
compat-gcc-c++-2.95.3-ipl3mdk
colorgcc-1.3.2-ipl3mdk
compat-gcc-2.95.3-ipl3mdk

в каком месте я не прав? Очень звука хочется... А SB PCI128 (snd-card-ens1371) в руки по прежнему не дается... Думал может ядро сменить - авось чего да прояснится.
----------------------------------------

soundfont.c:141:17: warning: pasting ""snd: "" and ""poor length %d\n"" does not give a valid preprocessing token
soundfont.c:185:25: warning: pasting ""snd: "" and ""soundfont: remove_info: patch not opened\n"" does not give a valid preprocessing token
soundfont.c:927:17: warning: pasting ""snd: "" and ""patch record too small %ld\n"" does not give a valid preprocessing token
ld -r -o ../../modules/snd-synth-emux.o emux.o emux_synth.o emux_seq.o emux_nrpn.o emux_effect.o emux_proc.o emux_oss.o soundfont.o
gcc   -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=686 -D__SMP__ -DCONFIG_SMP -DLINUX -pipe -Wall -O2 -fexpensive-optimizations -march=i686 -fomit-frame-pointer -malign-loops=2 -malign-jumps=2 -malign-functions=2 -mpreferred-stack-boundary=2 -Wstrict-prototypes -I/usr/src/RPM/BUILD/linux/include -I../.. -DEXPORT_SYMTAB -c emux_mem.c
emux_mem.c:192:17: warning: pasting ""snd: "" and ""emux: invalid block found (offset=0x%x, size=0x%x)\n"" does not give a valid preprocessing token
ld -r -o ../../modules/snd-emux-mem.o emux_mem.o
make[2]: Leaving directory `/usr/src/RPM/BUILD/linux/alsa-driver-0.5.10b/lowlevel/generic'
make[2]: Entering directory `/usr/src/RPM/BUILD/linux/alsa-driver-0.5.10b/lowlevel/isa'
gcc   -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=686 -D__SMP__ -DCONFIG_SMP -DLINUX -pipe -Wall -O2 -fexpensive-optimizations -march=i686 -fomit-frame-pointer -malign-loops=2 -malign-jumps=2 -malign-functions=2 -mpreferred-stack-boundary=2 -Wstrict-prototypes -I/usr/src/RPM/BUILD/linux/include -I../.. -DEXPORT_SYMTAB -c ad1816a.c
ad1816a.c:37:9: warning: pasting "": "" and ""chip busy.\n"" does not give a valid preprocessing token
ad1816a.c:37:9: warning: pasting ""snd: "" and "__FILE__" does not give a valid preprocessing token
ad1816a.c: In function `snd_ad1816a_busy_wait':
ad1816a.c:37: parse error before `__FILE__'
ad1816a.c:256:17: warning: pasting "": "" and ""invalid trigger mode 0x%x.\n"" does not give a valid preprocessing token
ad1816a.c:256:17: warning: pasting ""snd: "" and "__FILE__" does not give a valid preprocessing token
ad1816a.c: In function `snd_ad1816a_trigger':
ad1816a.c:256: parse error before `__FILE__'
ad1816a.c:701:17: warning: pasting "": "" and ""Unknown chip version %d:%d.\n"" does not give a valid preprocessing token
ad1816a.c:701:17: warning: pasting ""snd: "" and "__FILE__" does not give a valid preprocessing token
ad1816a.c: In function `snd_ad1816a_new_pcm_Rsmp_bb3ba1d0':
ad1816a.c:701: parse error before `__FILE__'
make[2]: *** [ad1816a.o] Error 1
make[2]: Leaving directory `/usr/src/RPM/BUILD/linux/alsa-driver-0.5.10b/lowlevel/isa'
make[1]: *** [all] Error 1
make[1]: Leaving directory `/usr/src/RPM/BUILD/linux/alsa-driver-0.5.10b/lowlevel'
make: *** [compile] Error 1
Неверный код возврата из /var/tmp/rpm-tmp.41848 (%build)
---------------------------------------


Best wishes,
+----------------------+--------------------------+
|  ."-.                |  Work: +7-(095)-229-4278 |
| /X  | _o.----.    _  |  ICQ:  103399444         |
|/\_  \/ /  __  \_// ) |  Artem K. Jouravsky      |
|\__)-/_/\_____)____/  |  http://www.ifirst.ru/   |
+----------------------+--------------------------+