[sisyphus] I: systemd-210 (regular: mouse, locale)
Michael Shigorin
mike на osdn.org.ua
Вт Мар 4 11:40:38 MSK 2014
On Fri, Feb 28, 2014 at 02:04:20PM +0400, Alexey Shabalin wrote:
> День добрый. В сизиф отправлен systemd-210. Изменений много.
http://nightly.altlinux.org/sisyphus/snapshots/20140304/
regular-cinnamon-20140304-i586.iso
В этом образе после установки в virtualbox не работает мышь --
при этом в LiveCD работает. xorg с прошлой недели не менялся,
хостовый vbox -- тоже. gpm в консоли при этом с мышью работает.
Также похоже, что сломался livecd-setlocale: передача lang=ru_RU
ядру (в /proc/cmdline долетает) теперь не приводит к выставлению
русской локали, получается LC_CTYPE=en_US.utf8, LC_* и LANG=POSIX.
Перепроверил на regular-e18-20140304-i586.iso -- с мышой странное:
ездить ездит, щелчки не регистрируются (на этот раз снял лог).
Было бы здорово понять, что стряслось, до завтра и починить --
сегодняшние сборки "rc", а вот завтрашние неделю будут "текущими".
Хотя можно притормозить маркировку их как tested, конечно...
(надо было мне не тянуть с предварительной сборкой)
> - старый патч для переименования интерфейсов отвалился. Прошу отдельно
> протестировать эту функциональность. to mike@ может найдешь время и
> посмотришь? Ты основной пользователь старых именований интерфейсов :)
Плохая новость; он совсем отвалился или ты что-то прикрутил?
> Из замеченых недостатков, медленное выключение - буду разбираться.
На regular-*.iso под vbox оно как раз прошло по сравнению с 208.
--
---- WBR, Michael Shigorin / http://altlinux.org
------ http://opennet.ru / http://anna-news.info
----------- следующая часть -----------
[ 4.576]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 4.576] X Protocol Version 11, Revision 0
[ 4.576] Build Operating System: ALT Linux Sisyphus (20081222) i686
[ 4.576] Current Operating System: Linux comp-xeon-cpu-70caca 3.10.32-std-def-alt1 #1 SMP Mon Feb 24 09:17:30 UTC 2014 i686
[ 4.576] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=UUID=9dc81317-fe04-49da-bdfb-95ff09663c68 ro vga=0x314 panic=30 quiet splash
[ 4.576] Build Date: 06 February 2014 08:15:08AM
[ 4.576]
[ 4.576] Current version of pixman: 0.32.4
[ 4.576] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.576] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.576] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 4 11:36:45 2014
[ 4.578] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4.578] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4.579] (==) No Layout section. Using the first Screen section.
[ 4.579] (==) No screen section available. Using defaults.
[ 4.579] (**) |-->Screen "Default Screen Section" (0)
[ 4.579] (**) | |-->Monitor "<default monitor>"
[ 4.580] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4.580] (==) Automatically adding devices
[ 4.580] (==) Automatically enabling devices
[ 4.580] (==) Automatically adding GPU devices
[ 4.580] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d
[ 4.580] (==) ModulePath set to "/usr/lib/X11/modules"
[ 4.580] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4.580] (II) Loader magic: 0x826d6c0
[ 4.580] (II) Module ABI versions:
[ 4.580] X.Org ANSI C Emulation: 0.4
[ 4.580] X.Org Video Driver: 15.0
[ 4.580] X.Org XInput driver : 20.0
[ 4.580] X.Org Server Extension : 8.0
[ 4.580] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4.583] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/4194304
[ 4.584] Initializing built-in extension Generic Event Extension
[ 4.584] Initializing built-in extension SHAPE
[ 4.584] Initializing built-in extension MIT-SHM
[ 4.584] Initializing built-in extension XInputExtension
[ 4.584] Initializing built-in extension XTEST
[ 4.584] Initializing built-in extension BIG-REQUESTS
[ 4.584] Initializing built-in extension SYNC
[ 4.584] Initializing built-in extension XKEYBOARD
[ 4.584] Initializing built-in extension XC-MISC
[ 4.584] Initializing built-in extension SECURITY
[ 4.584] Initializing built-in extension XINERAMA
[ 4.584] Initializing built-in extension XFIXES
[ 4.584] Initializing built-in extension RENDER
[ 4.584] Initializing built-in extension RANDR
[ 4.584] Initializing built-in extension COMPOSITE
[ 4.584] Initializing built-in extension DAMAGE
[ 4.584] Initializing built-in extension MIT-SCREEN-SAVER
[ 4.584] Initializing built-in extension DOUBLE-BUFFER
[ 4.584] Initializing built-in extension RECORD
[ 4.584] Initializing built-in extension DPMS
[ 4.584] Initializing built-in extension Present
[ 4.584] Initializing built-in extension DRI3
[ 4.584] Initializing built-in extension X-Resource
[ 4.584] Initializing built-in extension XVideo
[ 4.584] Initializing built-in extension XVideo-MotionCompensation
[ 4.584] Initializing built-in extension SELinux
[ 4.584] Initializing built-in extension XFree86-VidModeExtension
[ 4.584] Initializing built-in extension XFree86-DGA
[ 4.584] Initializing built-in extension XFree86-DRI
[ 4.584] Initializing built-in extension DRI2
[ 4.584] (==) Matched vboxvideo as autoconfigured driver 0
[ 4.584] (==) Matched vboxvideo as autoconfigured driver 1
[ 4.584] (==) Matched modesetting as autoconfigured driver 2
[ 4.585] (==) Matched fbdev as autoconfigured driver 3
[ 4.585] (==) Matched vesa as autoconfigured driver 4
[ 4.585] (==) Assigned the driver to the xf86ConfigLayout
[ 4.589] (II) Executed /usr/libexec/X11/drv.d/x11
[ 4.589] (II) "glx" will be loaded by default.
[ 4.589] (II) LoadModule: "dri2"
[ 4.589] (II) Module "dri2" already built-in
[ 4.589] (II) LoadModule: "glamoregl"
[ 4.590] (II) Loading /usr/lib/X11/modules/libglamoregl.so
[ 4.597] (II) Module glamoregl: vendor="X.Org Foundation"
[ 4.597] compiled for 1.15.0, module version = 0.6.0
[ 4.597] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.597] (II) LoadModule: "glx"
[ 4.597] (II) Loading /usr/lib/X11/modules/extensions/libglx.so
[ 4.598] (II) Module glx: vendor="X.Org Foundation"
[ 4.598] compiled for 1.15.0, module version = 1.0.0
[ 4.598] ABI class: X.Org Server Extension, version 8.0
[ 4.598] (==) AIGLX enabled
[ 4.598] Loading extension GLX
[ 4.598] (II) LoadModule: "vboxvideo"
[ 4.599] (II) Loading /usr/lib/X11/modules/drivers/vboxvideo_drv.so
[ 4.599] (II) Module vboxvideo: vendor="ALT Linux Team"
[ 4.599] compiled for 1.15.0, module version = 1.0.1
[ 4.599] Module class: X.Org Video Driver
[ 4.599] ABI class: X.Org Video Driver, version 15.0
[ 4.600] (**) Load address of symbol "VBOXVIDEO" is 0xb6d61240
[ 4.600] (II) LoadModule: "modesetting"
[ 4.600] (II) Loading /usr/lib/X11/modules/drivers/modesetting_drv.so
[ 4.600] (II) Module modesetting: vendor="X.Org Foundation"
[ 4.600] compiled for 1.15.0, module version = 0.8.1
[ 4.600] Module class: X.Org Video Driver
[ 4.600] ABI class: X.Org Video Driver, version 15.0
[ 4.600] (II) LoadModule: "fbdev"
[ 4.600] (II) Loading /usr/lib/X11/modules/drivers/fbdev_drv.so
[ 4.601] (II) Module fbdev: vendor="X.Org Foundation"
[ 4.601] compiled for 1.15.0, module version = 0.4.4
[ 4.601] Module class: X.Org Video Driver
[ 4.601] ABI class: X.Org Video Driver, version 15.0
[ 4.601] (II) LoadModule: "vesa"
[ 4.601] (II) Loading /usr/lib/X11/modules/drivers/vesa_drv.so
[ 4.601] (II) Module vesa: vendor="X.Org Foundation"
[ 4.601] compiled for 1.15.0, module version = 2.3.3
[ 4.601] Module class: X.Org Video Driver
[ 4.601] ABI class: X.Org Video Driver, version 15.0
[ 4.601] (II) VBoxVideo: guest driver for VirtualBox: vbox
[ 4.601] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 4.601] (II) FBDEV: driver for framebuffer: fbdev
[ 4.601] (II) VESA: driver for VESA chipsets: vesa
[ 4.601] (++) using VT number 7
[ 4.601] (WW) Falling back to old probe method for modesetting
[ 4.601] (WW) Falling back to old probe method for fbdev
[ 4.601] (II) Loading sub module "fbdevhw"
[ 4.601] (II) LoadModule: "fbdevhw"
[ 4.602] (II) Loading /usr/lib/X11/modules/libfbdevhw.so
[ 4.602] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 4.602] compiled for 1.15.0, module version = 0.0.2
[ 4.602] ABI class: X.Org Video Driver, version 15.0
[ 4.602] (WW) Falling back to old probe method for vesa
[ 4.602] (II) VBoxVideo(0): VirtualBox guest additions video driver version 4.3.6_OSE
[ 4.602] (EE) VBoxVideo(0): Failed to initialize the VirtualBox device (rc=-102) - make sure that the VirtualBox guest additions are properly installed. If you are not sure, try reinstalling them. The X Window graphics drivers will run in compatibility mode.
[ 4.602] (II) Loading sub module "ramdac"
[ 4.602] (II) LoadModule: "ramdac"
[ 4.602] (II) Module "ramdac" already built-in
[ 4.602] (II) Loading sub module "fb"
[ 4.602] (II) LoadModule: "fb"
[ 4.602] (II) Loading /usr/lib/X11/modules/libfb.so
[ 4.603] (II) Module fb: vendor="X.Org Foundation"
[ 4.603] compiled for 1.15.0, module version = 1.0.0
[ 4.603] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.603] (II) Loading sub module "shadowfb"
[ 4.603] (II) LoadModule: "shadowfb"
[ 4.603] (II) Loading /usr/lib/X11/modules/libshadowfb.so
[ 4.603] (II) Module shadowfb: vendor="X.Org Foundation"
[ 4.603] compiled for 1.15.0, module version = 1.0.0
[ 4.603] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4.603] (II) Loading sub module "vgahw"
[ 4.603] (II) LoadModule: "vgahw"
[ 4.603] (II) Loading /usr/lib/X11/modules/libvgahw.so
[ 4.604] (II) Module vgahw: vendor="X.Org Foundation"
[ 4.604] compiled for 1.15.0, module version = 0.1.0
[ 4.604] ABI class: X.Org Video Driver, version 15.0
[ 4.604] (II) Loading sub module "dri"
[ 4.604] (II) LoadModule: "dri"
[ 4.604] (II) Module "dri" already built-in
[ 4.604] (II) VBoxVideo(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4.604] (==) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32
[ 4.604] (--) VBoxVideo(0): Virtual size is 32000x32000 (pitch 32000)
[ 4.604] (**) VBoxVideo(0): Built-in mode "VBoxInitialMode": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz
[ 4.604] (II) VBoxVideo(0): Modeline "VBoxInitialMode"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz b)
[ 4.604] (**) VBoxVideo(0): Built-in mode "VBoxDynamicMode": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz
[ 4.604] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz b)
[ 4.604] (**) VBoxVideo(0): Built-in mode "VBoxDynamicMode": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz
[ 4.604] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz b)
[ 4.604] (**) VBoxVideo(0): Built-in mode "VBox-1600x1200": 116.2 MHz (scaled from 0.0 MHz), 72.4 kHz, 60.0 Hz
[ 4.604] (II) VBoxVideo(0): Modeline "VBox-1600x1200"x0.0 116.21 1600 1602 1604 1606 1200 1202 1204 1206 (72.4 kHz b)
[ 4.604] (**) VBoxVideo(0): Built-in mode "VBox-1440x1050": 91.6 MHz (scaled from 0.0 MHz), 63.4 kHz, 60.0 Hz
[ 4.604] (II) VBoxVideo(0): Modeline "VBox-1440x1050"x0.0 91.62 1440 1442 1444 1446 1050 1052 1054 1056 (63.4 kHz b)
[ 4.604] (**) VBoxVideo(0): Built-in mode "VBox-1280x960": 74.5 MHz (scaled from 0.0 MHz), 58.0 kHz, 60.0 Hz
[ 4.604] (II) VBoxVideo(0): Modeline "VBox-1280x960"x0.0 74.54 1280 1282 1284 1286 960 962 964 966 (58.0 kHz b)
[ 4.604] (**) VBoxVideo(0): Built-in mode "VBox-1024x768": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz
[ 4.604] (II) VBoxVideo(0): Modeline "VBox-1024x768"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz b)
[ 4.604] (**) VBoxVideo(0): Built-in mode "VBox-800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz
[ 4.604] (II) VBoxVideo(0): Modeline "VBox-800x600"x0.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz b)
[ 4.604] (**) VBoxVideo(0): Built-in mode "VBox-640x480": 18.8 MHz (scaled from 0.0 MHz), 29.2 kHz, 60.0 Hz
[ 4.604] (II) VBoxVideo(0): Modeline "VBox-640x480"x0.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz b)
[ 4.604] (II) VBoxVideo(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 4.604] (==) VBoxVideo(0): RGB weight 888
[ 4.604] (==) VBoxVideo(0): Default visual is TrueColor
[ 4.604] (==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4.604] (==) VBoxVideo(0): DPI set to (96, 96)
[ 4.604] (II) UnloadModule: "modesetting"
[ 4.604] (II) Unloading modesetting
[ 4.605] (II) UnloadModule: "fbdev"
[ 4.605] (II) Unloading fbdev
[ 4.605] (II) UnloadSubModule: "fbdevhw"
[ 4.605] (II) Unloading fbdevhw
[ 4.605] (II) UnloadModule: "vesa"
[ 4.605] (II) Unloading vesa
[ 4.605] (--) Depth 24 pixmap format is 32 bpp
[ 4.612] drmOpenDevice: node name is /dev/dri/card0
[ 4.612] drmOpenDevice: open result is 10, (OK)
[ 4.612] drmOpenDevice: node name is /dev/dri/card0
[ 4.612] drmOpenDevice: open result is 10, (OK)
[ 4.612] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 4.612] drmOpenDevice: node name is /dev/dri/card0
[ 4.612] drmOpenDevice: open result is 10, (OK)
[ 4.612] drmOpenByBusid: drmOpenMinor returns 10
[ 4.612] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 4.612] (II) [drm] DRM interface version 1.4
[ 4.612] (II) [drm] DRM open master succeeded.
[ 4.612] (II) VBoxVideo(0): [drm] Using the DRM lock SAREA also for drawables.
[ 4.612] (II) VBoxVideo(0): [drm] framebuffer handle = 0xe0000000
[ 4.612] (II) VBoxVideo(0): [drm] added 1 reserved context for kernel
[ 4.612] (II) VBoxVideo(0): X context handle = 0x1
[ 4.612] (II) VBoxVideo(0): [drm] installed DRM signal handler
[ 4.613] (II) VBoxVideo(0): visual configurations initialized
[ 4.615] (II) VBoxVideo(0): Requested monitor count: 1
[ 4.615] (II) VBoxVideo(0): Output VBOX0 has no monitor section
[ 4.615] (II) VBoxVideo(0): Output VBOX0 has no monitor section
[ 4.615] (II) VBoxVideo(0): EDID for output VBOX0
[ 4.615] (II) VBoxVideo(0): Manufacturer: VBX Model: 0 Serial#: 50332672
[ 4.615] (II) VBoxVideo(0): Year: 1990 Week: 1
[ 4.615] (II) VBoxVideo(0): EDID Version: 1.3
[ 4.615] (II) VBoxVideo(0): Digital Display Input
[ 4.615] (II) VBoxVideo(0): Indeterminate output size
[ 4.615] (II) VBoxVideo(0): Gamma: 2.20
[ 4.615] (II) VBoxVideo(0): DPMS capabilities: StandBy Suspend Off
[ 4.615] (II) VBoxVideo(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 4.615] (II) VBoxVideo(0): Default color space is primary color space
[ 4.615] (II) VBoxVideo(0): First detailed timing is preferred mode
[ 4.615] (II) VBoxVideo(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 4.615] (II) VBoxVideo(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 4.615] (II) VBoxVideo(0): Manufacturer's mask: 0
[ 4.615] (II) VBoxVideo(0): Supported detailed timing:
[ 4.615] (II) VBoxVideo(0): clock: 47.8 MHz Image Size: 0 x 0 mm
[ 4.615] (II) VBoxVideo(0): h_active: 1024 h_sync: 1026 h_sync_end 1028 h_blank_end 1030 h_border: 0
[ 4.615] (II) VBoxVideo(0): v_active: 768 v_sync: 770 v_sync_end 772 v_blanking: 774 v_border: 0
[ 4.615] (II) VBoxVideo(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 1005 MHz
[ 4.615] (II) VBoxVideo(0): Monitor name: VBOX monitor
[ 4.615] (II) VBoxVideo(0): EDID (in hex):
[ 4.615] (II) VBoxVideo(0): 00ffffffffffff005858000000040003
[ 4.615] (II) VBoxVideo(0): 0100010380000078eeee91a3544c9926
[ 4.615] (II) VBoxVideo(0): 0f505400000001010101010101010101
[ 4.615] (II) VBoxVideo(0): 010101010101af120006400006300202
[ 4.615] (II) VBoxVideo(0): 2200000000000000000000fd0000c800
[ 4.615] (II) VBoxVideo(0): c864000a202020202020000000fc0056
[ 4.615] (II) VBoxVideo(0): 424f58206d6f6e69746f720a00000010
[ 4.615] (II) VBoxVideo(0): 000a20202020202020202020202000fb
[ 4.615] (II) VBoxVideo(0): Printing probed modes for output VBOX0
[ 4.615] (II) VBoxVideo(0): Modeline "1024x768"x60.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz Pb)
[ 4.615] (II) VBoxVideo(0): Modeline "1600x1200"x60.0 116.21 1600 1602 1604 1606 1200 1202 1204 1206 (72.4 kHz b)
[ 4.615] (II) VBoxVideo(0): Modeline "1440x1050"x60.0 91.62 1440 1442 1444 1446 1050 1052 1054 1056 (63.4 kHz b)
[ 4.615] (II) VBoxVideo(0): Modeline "1280x960"x60.0 74.54 1280 1282 1284 1286 960 962 964 966 (58.0 kHz b)
[ 4.615] (II) VBoxVideo(0): Modeline "1024x768"x60.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz b)
[ 4.615] (II) VBoxVideo(0): Modeline "800x600"x60.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz b)
[ 4.615] (II) VBoxVideo(0): Modeline "640x480"x60.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz b)
[ 4.615] (II) VBoxVideo(0): Output VBOX0 connected
[ 4.615] (II) VBoxVideo(0): Using exact sizes for initial modes
[ 4.615] (II) VBoxVideo(0): Output VBOX0 using initial mode 1024x768
[ 4.615] (II) VBoxVideo(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 4.615] (II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 4.616] (==) VBoxVideo(0): DPMS enabled
[ 4.616] (II) VBoxVideo(0): [DRI] installation complete
[ 4.616] (--) RandR disabled
[ 4.625] (II) SELinux: Disabled on system
[ 4.626] (II) AIGLX: Screen 0 is not DRI2 capable
[ 4.626] (EE) AIGLX: reverting to software rendering
[ 4.653] (II) AIGLX: Loaded and initialized swrast
[ 4.653] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 4.654] (II) VBoxVideo(0): Setting screen physical size to 270 x 203
[ 4.710] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 4.710] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4.710] (II) LoadModule: "evdev"
[ 4.710] (II) Loading /usr/lib/X11/modules/input/evdev_drv.so
[ 4.713] (II) Module evdev: vendor="X.Org Foundation"
[ 4.713] compiled for 1.15.0, module version = 2.8.2
[ 4.713] Module class: X.Org XInput Driver
[ 4.713] ABI class: X.Org XInput driver, version 20.0
[ 4.713] (II) Using input driver 'evdev' for 'Power Button'
[ 4.713] (**) Power Button: always reports core events
[ 4.713] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 4.713] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 4.713] (--) evdev: Power Button: Found keys
[ 4.713] (II) evdev: Power Button: Configuring as keyboard
[ 4.713] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 4.713] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 4.713] (**) Option "xkb_rules" "evdev"
[ 4.713] (**) Option "xkb_model" "pc104"
[ 4.713] (**) Option "xkb_layout" "us"
[ 4.739] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 4.739] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 4.739] (II) Using input driver 'evdev' for 'Sleep Button'
[ 4.739] (**) Sleep Button: always reports core events
[ 4.739] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 4.739] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 4.739] (--) evdev: Sleep Button: Found keys
[ 4.739] (II) evdev: Sleep Button: Configuring as keyboard
[ 4.739] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input2/event2"
[ 4.739] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[ 4.739] (**) Option "xkb_rules" "evdev"
[ 4.739] (**) Option "xkb_model" "pc104"
[ 4.739] (**) Option "xkb_layout" "us"
[ 4.740] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 4.740] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 4.740] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 4.740] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard"
[ 4.740] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 4.740] (**) AT Translated Set 2 keyboard: always reports core events
[ 4.740] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 4.740] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 4.740] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 4.740] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 4.740] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 4.740] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
[ 4.740] (**) Option "xkb_rules" "evdev"
[ 4.740] (**) Option "xkb_model" "pc104"
[ 4.740] (**) Option "xkb_layout" "us"
[ 5.154] (EE) VBoxVideo(0): Unable to determine whether the virtual machine supports mouse pointer integration - request initialization failed with return code -4
[ 5.294] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/event5)
[ 5.294] (**) VirtualBox mouse integration: Applying InputClass "evdev pointer catchall"
[ 5.294] (II) Using input driver 'evdev' for 'VirtualBox mouse integration'
[ 5.294] (**) VirtualBox mouse integration: always reports core events
[ 5.294] (**) evdev: VirtualBox mouse integration: Device: "/dev/input/event5"
[ 5.294] (--) evdev: VirtualBox mouse integration: Vendor 0x80ee Product 0xcafe
[ 5.294] (--) evdev: VirtualBox mouse integration: Found 1 mouse buttons
[ 5.294] (--) evdev: VirtualBox mouse integration: Found absolute axes
[ 5.294] (--) evdev: VirtualBox mouse integration: Found x and y absolute axes
[ 5.294] (--) evdev: VirtualBox mouse integration: Found absolute touchscreen
[ 5.294] (II) evdev: VirtualBox mouse integration: Configuring as touchscreen
[ 5.294] (**) evdev: VirtualBox mouse integration: YAxisMapping: buttons 4 and 5
[ 5.294] (**) evdev: VirtualBox mouse integration: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 5.294] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/input/input5/event5"
[ 5.294] (II) XINPUT: Adding extended input device "VirtualBox mouse integration" (type: TOUCHSCREEN, id 9)
[ 5.294] (II) evdev: VirtualBox mouse integration: initialized for absolute axes.
[ 5.295] (**) VirtualBox mouse integration: (accel) keeping acceleration scheme 1
[ 5.295] (**) VirtualBox mouse integration: (accel) acceleration profile 0
[ 5.295] (**) VirtualBox mouse integration: (accel) acceleration factor: 2.000
[ 5.295] (**) VirtualBox mouse integration: (accel) acceleration threshold: 4
[ 9.514] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 9.514] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.
[ 9.514] (II) VBoxVideo(0): Using hsync ranges from config file
[ 9.514] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 9.514] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 9.514] (II) VBoxVideo(0): Modeline "1024x768"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 -hsync -vsync (46.4 kHz eP)
[ 9.535] (EE) VBoxVideo(0): Unable to determine whether the virtual machine supports mouse pointer integration - request initialization failed with return code -4
[ 9.535] (EE) VBoxVideo(0): Unable to determine whether the virtual machine supports mouse pointer integration - request initialization failed with return code -4
[ 9.535] (EE) VBoxVideo(0): Unable to determine whether the virtual machine supports mouse pointer integration - request initialization failed with return code -4
[ 9.775] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 9.775] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.
[ 9.775] (II) VBoxVideo(0): Using hsync ranges from config file
[ 9.775] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 9.775] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 9.775] (II) VBoxVideo(0): Modeline "1024x768"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 -hsync -vsync (46.4 kHz eP)
[ 35.184] (II) VBoxVideo(0): Requested monitor count: 1
[ 35.184] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 35.184] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.
[ 35.185] (II) VBoxVideo(0): Using hsync ranges from config file
[ 35.185] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 35.185] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 35.185] (II) VBoxVideo(0): Modeline "1024x768"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 -hsync -vsync (46.4 kHz eP)
[ 35.185] (EE) VBoxVideo(0): Unable to determine whether the virtual machine supports mouse pointer integration - request initialization failed with return code -4
[ 35.185] setversion 1.4 failed: Permission denied
[ 60.343] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 60.343] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.
[ 60.343] (II) VBoxVideo(0): Using hsync ranges from config file
[ 60.343] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 60.343] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 60.343] (II) VBoxVideo(0): Modeline "1024x768"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 -hsync -vsync (46.4 kHz eP)
Подробная информация о списке рассылки Sisyphus