[sisyphus] Ядро std-def-3.10.17-alt1 - система не грузится.

[Vyatcheslav Perevalov]

В Wed, 25 Dec 2013 14:37:45 +0400
Sergey <a_s_y на sama.ru> пишет:

> > 00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2)
> >         Subsystem: ASUSTeK Computer Inc. Device 8234
> >         Kernel driver in use: pata_amd
> > 00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller
> > (rev a2) Subsystem: ASUSTeK Computer Inc. Device 8234
> >         Kernel driver in use: sata_nv
> > 
> > HDD с системой на каком из них ? Или, может, есть более одного HDD
> > и разделы с разных HDD сразу подключаются ?  
> 

[root на workstation ~]# ls -1 /dev/disk/by-path 
ls: невозможно получить доступ к /dev/disk/by-path: Нет такого файла
или каталога 
[root на workstation ~]# ls -1 /dev/disk/
by-id
by-uuid
[root на workstation ~]#

> Кстати, ls -1 /dev/disk/by-path должен показать, кто где. 
> Или надо в /var/log/dmesg посмотреть.

Если я не ошибаюсь, это где-то здесь:

[    0.960377] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[    0.960459] sata_nv 0000:00:08.0: setting latency timer to 64
[    0.971382] scsi0 : sata_nv
[    0.977014] scsi1 : sata_nv
[    0.977162] ata1: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma
0xd880 irq 21 
[    0.977166] ata2: SATA max UDMA/133 cmd 0xe000 ctl
0xdc00 bmdma 0xd888 irq 21 
[    0.977237] pata_amd 0000:00:06.0:
version 0.4.1 
[    0.977294] pata_amd 0000:00:06.0: setting latency
timer to 64 
[    0.982784] scsi2 : pata_amd
[    0.995955] scsi3 : pata_amd
[    0.996118] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0
irq 14 
[    0.996121] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma
0xffa8 irq 15 
[    1.164361] ata3.00: ATAPI: Optiarc DVD RW AD-5200A,
1.01, max UDMA/66 
[    1.164375] ata3: nv_mode_filter:
0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f
(30:900:0x11) 
[    1.180295] ata3.00: configured for UDMA/66
[    1.444037] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.499945] ata1.00: ATA-7: MAXTOR STM3160815AS, 3.AAD, max UDMA/133
[    1.499948] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth
0/32) 
[    1.574909] ata1.00: configured for UDMA/133 
[    1.575085] scsi 0:0:0:0: Direct-Access     ATA      MAXTOR
STM316081 3.AA PQ: 0 ANSI: 5 
[    1.894260] ata2: SATA link down (SStatus 0 SControl 300)
[    1.895897] scsi 2:0:0:0: CD-ROM Optiarc  DVD RW AD-5200A  1.01 PQ:
0 ANSI: 5 
[    1.896231] ata4: port disabled--ignoring 
[    1.904534] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks:
(160 GB/149 GiB) 
[    1.904603] sd 0:0:0:0: [sda] Write Protect is off
[    1.904607] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 
[    1.904634] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA 
[    1.969079]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[    1.969765] sd 0:0:0:0: [sda] Attached SCSI disk 
[    2.995658] PM: Starting manual resume from disk 
[    2.995665] PM: Hibernation image partition 8:3 present
[    2.995667] PM: Looking for hibernation image.