Linux version 2.6.18-ovz-rhel-alt13.M51.2 (builder@apiary.armor.altlinux.org) (gcc version 4.1.2 20070626 (ALT Linux, build 4.1.2-alt7)) #1 SMP Sat Jan 30 09:11:09 UTC 2010
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000010000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000f7ef0000 (usable)
 BIOS-e820: 00000000f7ef0000 - 00000000f7efc000 (ACPI data)
 BIOS-e820: 00000000f7efc000 - 00000000f7f00000 (ACPI NVS)
 BIOS-e820: 00000000f7f00000 - 00000000f7f80000 (usable)
 BIOS-e820: 00000000f7f80000 - 00000000f8000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
3071MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f6750
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 1015680
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 225280 pages, LIFO batch:31
  HighMem zone: 786304 pages, LIFO batch:31
DMI present.
Using APIC driver default
ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f67b0
ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0xf7ef82bb
ACPI: FADT (v001 INTEL  K_CANYON 0x06040000 PTL  0x00000008) @ 0xf7efbe78
ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x00000000) @ 0xf7efbeec
ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0xf7efbf88
ACPI: SPCR (v001 PTLTD  $UCRTBL$ 0x06040000 PTL  0x00000001) @ 0xf7efbfb0
ACPI: DSDT (v001  INTEL   PLUMAS 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
Processor #6 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
Processor #7 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47
ACPI: IOAPIC (id[0x04] address[0xfec80400] gsi_base[48])
IOAPIC[2]: apic_id 4, version 32, address 0xfec80400, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 3 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at f8800000 (gap: f8000000:06c00000)
Detected 1996.696 MHz processor.
Built 1 zonelists.  Total pages: 1015680
Kernel command line: auto BOOT_IMAGE=ALTLinux ro root=UUID=012d4649-d75d-45eb-80b3-176416080e49 panic=30
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
mapped IOAPIC to ffffb000 (fec80000)
mapped IOAPIC to ffffa000 (fec80400)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 4020752k/4062720k available (1732k kernel code, 40720k reserved, 1040k data, 232k init, 3145152k highmem)
Calibrating delay loop (skipped), value calculated using timer frequency.. 3993.39 BogoMIPS (lpj=7986784)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00000400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00000400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 00000400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: (006b8000-006bb334) 12k freed
ACPI: Core revision 20060707
Page beancounter hash is 262144 entries.
CPU0: Intel(R) Xeon(TM) CPU 2.00GHz stepping 07
Booting processor 1/1 eip 10000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3993.47 BogoMIPS (lpj=7986953)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00000400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00000400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 00000400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Xeon(TM) CPU 2.00GHz stepping 07
Booting processor 2/6 eip 10000
Initializing CPU#2
Calibrating delay using timer specific routine.. 3993.55 BogoMIPS (lpj=7987108)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00000400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00000400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 3
CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 00000400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel P4/Xeon Extended MCE MSRs (12) available
CPU2: Thermal monitoring enabled
CPU2: Intel(R) Xeon(TM) CPU 2.00GHz stepping 07
Booting processor 3/7 eip 10000
Not responding.
Inquiring remote APIC #7...
... APIC #7 ID: failed
... APIC #7 VERSION: failed
... APIC #7 SPIV: failed
CPU #7 not responding - cannot use it.
Total of 3 processors activated (11980.42 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Using local APIC timer interrupts.
checking TSC synchronization across 3 CPUs: passed.
Brought up 3 CPUs
zapping low mappings.
sizeof(vma)=84 bytes
sizeof(page)=36 bytes
sizeof(inode)=364 bytes
sizeof(dentry)=148 bytes
sizeof(ext3inode)=516 bytes
sizeof(buffer_head)=52 bytes
sizeof(skbuff)=188 bytes
migration_cost=296,894
checking if image is initramfs... it is
Freeing initrd memory: (00e6c000-00effe19) 591k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd8b5, last bus=4
PCI: Using configuration type 1
Setting up standard PCI resources
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Firmware left 0000:04:05.0 e100 interrupts enabled, disabling
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *5
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICH3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HLB_.PH2A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HLB_.PH2B._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Bridge: 0000:01:1d.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:01:1f.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:02.0
  IO window: disabled.
  MEM window: fc100000-00000000
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
  IO window: 3000-0000
  MEM window: fc200000-00000000
  PREFETCH window 0x00000000f8800000-0x00000000f88fffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP bind hash table entries: 8192 (order: 4, 65536 bytes)
Simple Boot Flag at 0x36 set to 0x1
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:04:04.0
vesafb: framebuffer at 0xfd000000, mapped to 0xf8980000, using 1875k, total 8128k
vesafb: mode is 800x600x16, linelength=1600, pages=7
vesafb: protected mode interface info at c000:4a2e
vesafb: pmi: set display start = c00c4a94, set palette = c00c4aee
vesafb: pmi: ports = 3085 301f 30b4 30b8 3018 3014 30c0 30c3 30c1 
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
input: AT Translated Set 2 keyboard as /class/input/input0
TCP bic registered
NET: Registered protocol family 1
Using IPI Shortcut mode
Freeing unused kernel memory: (006bc000-006f6000) 232k freed
Time: tsc clocksource has been installed.
Write protecting the kernel read-only data: 322k
Executing init=/init
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169
ICH3: chipset revision 2
ICH3: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x2060-0x2067, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x2068-0x206f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: WDC WD3200JB-00KFA0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: max request size: 512KiB
hda: 625142448 sectors (320072 MB) w/8192KiB Cache, CHS=38913/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 hda3
hdc: WDC WD3200JB-00KFA0, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: max request size: 512KiB
hdc: 625142448 sectors (320072 MB) w/8192KiB Cache, CHS=38913/255/63, UDMA(100)
hdc: cache flushes supported
 hdc: hdc1 hdc2 hdc3
SCSI subsystem initialized
ACPI: No dock devices found.
libata version 3.00 loaded.
md: raid1 personality registered for level 1
md: Autodetecting RAID arrays.
md: autorun ...
md: considering hdc3 ...
md:  adding hdc3 ...
md: hdc1 has different UUID to hdc3
md:  adding hda3 ...
md: hda1 has different UUID to hdc3
md: created md1
md: bind<hda3>
md: bind<hdc3>
md: running: <hdc3><hda3>
raid1: raid set md1 active with 2 out of 2 mirrors
md: considering hdc1 ...
md:  adding hdc1 ...
md:  adding hda1 ...
md: created md0
md: bind<hda1>
md: bind<hdc1>
md: running: <hdc1><hda1>
raid1: raid set md0 active with 2 out of 2 mirrors
md: ... autorun DONE.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: PC Speaker as /class/input/input1
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 177, io base 0x00002000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 185, io base 0x00002020
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 169, io base 0x00002040
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:04:05.0[A] -> GSI 22 (level, low) -> IRQ 193
e100: eth0: e100_probe: addr 0xfc221000, irq 193, MAC addr 00:30:48:20:02:BC
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 201
Real Time Clock Driver v1.12ac
Adding 2048276k swap on /dev/hda2.  Priority:-1 extents:1 across:2048276k
Adding 2048276k swap on /dev/hdc2.  Priority:-2 extents:1 across:2048276k
input: ImPS/2 Generic Wheel Mouse as /class/input/input2
EXT3 FS on md0, internal journal
ts: Compaq touchscreen protocol output
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 232 bytes per conntrack
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
IPv4 over IPv4 tunneling driver
NET: Registered protocol family 17
CT: 1938: started