smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Western Digital Caviar SE family Device Model: WDC WD2500JB-00REA0 Serial Number: WD-WCANK9147241 Firmware Version: 20.00K20 User Capacity: 250.059.350.016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Aug 6 11:49:13 2007 SAMST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (8280) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 96) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 1 3 Spin_Up_Time 0x0003 193 189 021 Pre-fail Always - 5350 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 206 5 Reallocated_Sector_Ct 0x0033 199 199 140 Pre-fail Always - 5 7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 4898 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 200 194 Temperature_Celsius 0x0022 110 104 000 Old_age Always - 40 196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 11 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 11 occurred at disk power-on lifetime: 943 hours (39 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 b6 e0 fd e0 Error: UNC 8 sectors at LBA = 0x00fde0b6 = 16638134 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 d0 08 b6 e0 fd 0b 58 03:14:00.710 READ DMA EXT 25 d0 10 c6 e0 fd 0b 58 03:14:00.695 READ DMA EXT 35 d0 01 b6 8d 50 0b 58 03:14:00.690 WRITE DMA EXT 35 d0 01 c6 3d 50 0b 58 03:14:00.675 WRITE DMA EXT 35 d0 01 a6 3d 50 0b 58 03:14:00.675 WRITE DMA EXT Error 10 occurred at disk power-on lifetime: 943 hours (39 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 10 b6 e0 fd e0 Error: UNC 16 sectors at LBA = 0x00fde0b6 = 16638134 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 d0 10 b6 e0 fd 0b 58 03:13:58.730 READ DMA EXT 25 d0 01 48 bb e7 14 58 03:13:58.730 READ DMA EXT 25 d0 01 d5 b0 67 12 58 03:13:58.730 READ DMA EXT 25 d0 01 62 a6 e7 0f 58 03:13:58.730 READ DMA EXT 25 d0 01 61 b7 d7 0f 58 03:13:58.730 READ DMA EXT Error 9 occurred at disk power-on lifetime: 943 hours (39 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 20 b6 e0 fd e0 Error: UNC 32 sectors at LBA = 0x00fde0b6 = 16638134 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 d0 20 b6 e0 fd 0b 58 03:13:56.655 READ DMA EXT 25 d0 01 bb c5 67 17 58 03:13:56.655 READ DMA EXT 25 d0 20 96 e0 fd 0b 58 03:13:56.035 READ DMA EXT 25 d0 01 48 bb e7 14 58 03:13:56.035 READ DMA EXT 25 d0 01 d5 b0 67 12 58 03:13:56.035 READ DMA EXT Error 8 occurred at disk power-on lifetime: 943 hours (39 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 40 96 e0 fd e0 Error: UNC 64 sectors at LBA = 0x00fde096 = 16638102 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 d0 40 96 e0 fd 0b 58 03:13:53.815 READ DMA EXT 25 d0 40 56 e0 fd 0b 58 03:13:53.810 READ DMA EXT 25 d0 01 bb c5 67 17 58 03:13:53.810 READ DMA EXT 25 d0 01 48 bb e7 14 58 03:13:53.810 READ DMA EXT 25 d0 01 d5 b0 67 12 58 03:13:53.810 READ DMA EXT Error 7 occurred at disk power-on lifetime: 943 hours (39 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 80 56 e0 fd e0 Error: UNC 128 sectors at LBA = 0x00fde056 = 16638038 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 d0 80 56 e0 fd 0b 58 03:13:51.850 READ DMA EXT 25 d0 80 d6 e1 fd 0b 58 03:13:51.840 READ DMA EXT 25 d0 80 56 e1 fd 0b 58 03:13:51.830 READ DMA EXT 25 d0 01 bb c5 67 17 58 03:13:51.830 READ DMA EXT 25 d0 01 48 bb e7 14 58 03:13:51.830 READ DMA EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 9 - # 2 Short offline Completed without error 00% 8 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.