Linux version 2.2.19-alt7-up (ldv@basalt.office.altlinux.ru) (gcc version 2.95.3 20010315 (ALT Linux, build 2.95.3-ipl6mdk)) #1 Fri Oct 19 21:23:42 MSD 2001
USER-provided physical RAM map:
 USER: 0009f000 @ 00000000 (usable)
 USER: 0fef0000 @ 00100000 (usable)
Detected 1133402 kHz processor.
ide_setup: hdc=ide-scsi
Console: colour VGA+ 80x25
Calibrating delay loop... 2260.99 BogoMIPS
Memory: 256112k/262080k available (1028k kernel code, 408k reserved, 3036k data, 184k init, 0k bigmem)
Dentry hash table entries: 32768 (order 6, 256k)
Buffer cache hash table entries: 262144 (order 8, 1024k)
Page cache hash table entries: 65536 (order 6, 256k)
Inode hash table entries: 16384 (128k), inode-max: 16384
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: L1 I Cache: 64K  L1 D Cache: 64K
CPU: L2 Cache: 256K
CPU: AMD Athlon(tm) Processor stepping 02
Enabling fast FPU save and restore... done.
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfb3b0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Enabling I/O for device 00:00
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 262144 bhash 65536)
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
Linux IP multicast router 0.06 plus PIM-SM
Initializing RT netlink socket
Starting kswapd v 1.5 
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized:  16 RAM disks of 4096K size
loop: registered device at major 7
Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 89
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8231 (rev 10) IDE UDMA66 controller on pci00:17.1
    ide0: BM-DMA at 0xcc00-0xcc07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdc:DMA, hdd:pio
hda: IC35L040AVER07-0, ATA DISK drive
hdc: CD-W516EB, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: IC35L040AVER07-0, 39266MB w/1916kB Cache, CHS=5005/255/63, UDMA(33)
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
   pII_mmx   :  2647.950 MB/sec
   p5_mmx    :  3121.152 MB/sec
   8regs     :  1300.734 MB/sec
   32regs    :  1223.391 MB/sec
using fastest function: p5_mmx (3121.152 MB/sec)
NET4: Frame Diverter 0.5
md.c: sizeof(mdp_super_t) = 4096
Partition check:
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 1312 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/done.
autodetecting RAID arrays
autorun ...
... autorun DONE.
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.13)
VFS: Mounted root (ext2 filesystem).
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 184k freed
Executing init=/sbin/init
Adding Swap: 506008k swap-space (priority -1)
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 1 host.
  Vendor: TEAC      Model: CD-W516EB         Rev: 1.0B
  Type:   CD-ROM                             ANSI SCSI revision: 02
MSDOS FS: Using codepage 866
MSDOS FS: IO charset koi8-r
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.237 $ time 21:30:32 Oct 19 2001
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
usb.c: USB new device connect, assigned device number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
usb.c: USB new device connect, assigned device number 1
hub.c: USB hub found
hub.c: 2 ports detected
parport0: PC-style at 0x378 [SPP]
parport_probe: failed
parport0: no IEEE-1284 device present.
lp0: using parport0 (polling).
NVRM: loading NVIDIA NVdriver Kernel Module  1.0.2313  Tue Nov 27 12:01:24 PST 2001
mtrr: no MTRR for d0000000000,1000000 found
unset mem range for 0xd0000000 0x2000000